AKG WMS 40 Specifications
SR 40 Single Receiver
AKG CK 55 Engineer's Specifications
- Carrier frequency range: 710 to 865 MHz, 1 fixed frequency
- Modulation: FM
- Audio Bandwidth: 40 Hz to 20 kHz
- THD (typical) 0.8 % (at 1 kHz)
- Signal to Noise Ratio (typical): 110 dB(A)
- Power Supply: 120/230 V AC
- Audio Outputs: Balanced 1/4-inch jack, output level adjustable, at rated deviation: 500 mV rms.
- Dimensions: 7.8 x 7.4 x 1.7 inches
- Net Weight: 1.3 lbs.
The microphone shall be a cardioid condenser clip-on microphone for handsfree use by lecturers, preachers, tour guides, video production personnel, etc. The microphone shall perform to the following specifications: frequency range: 15 to 18,000 Hz; sensitivity at 1 kHz: 8.8 mV/Pa; electrical impedance: 200 ohms. The microphone shall measure 0.3 inches in diameter and 23 0.9 inches in length, the microphone cable shall be 5 ft. 4 in. long. The microphone shall weigh 0.08 oz. and be finished in matte black. Consumer Alert!
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at www.fcc.gov/cgb/wirelessmicrophonesNote:
All of the wireless systems that AMS sells comply with the FCC guidelines and regulations.
We are presenting this information as a matter of legally required disclosure.