|
|
|
|
|
|
|  | | Audio-Technica |
 
Audio Technica ATM350 Instrument Condenser MicrophoneThe Audio Technica ATM350 Condenser Microphone comes supplied with AT’s versatile UniMount clip and violin mount providing incredible flexibility right out of the box. The low-profile ATM350 is an exceptional cardioid condenser microphone designed to clip to brass, reeds, piano, snare, toms, and violin. The microphone offers a crisp, clear, well-balanced response, even at high SPLs. It features an integral 80 Hz hi-pass filter and is also equipped with a new in-line power module. Its cardioid polar pattern reduces pickup of sounds from the side and rear for effective protection against feedback.
Audio-Technica ATM350 Features
- Attaches to brass, reeds, piano, acoustic bass, snare, toms, and violin
- UniMount clip permits accurate positioning, provides shock resistance and protects element
- Unique violin mount permits unobtrusive placement of microphone between the instrument's bridge and tailpiece
- Crisp, clear, well-balanced response, even at high SPLs
- Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
- Interchangeable elements available for hypercardioid and omnidirectional polar patterns
- Corrosion-resistant contacts from gold-plated XLRM-type connector
- Rugged, all-metal design and construction for years of trouble-free use
Audio Technica ATM350 Specifications
- Element: Fixed-charge back plate permanently polarized condenser
- Polar Pattern: Cardioid
- Frequency Response: 40-20,000 Hz
- Low Frequency Roll-Off: 80 Hz, 12 dB/octave
- Open Circuit Sensitivity: –49 dB (3.5 mV) re 1V at 1 Pa*
- Impedance: 50 ohms
- Maximum Input Sound Level: 149 dB SPL, 1 kHz at 1% T.H.D.
- Dynamic Range (typical): 122 dB, 1 kHz at Max SPL
- Signal-to-Noise Ratio1: 67 dB, 1 kHz at 1 Pa*
- Phantom Power Requirements: 11-52V DC, 3.5 mA typical
- Switch: Flat, roll-off
- Weight (less cable and accessories):
- Microphone: 14.5 g (0.5 oz)
- Power Module: 81.2 g (2.9 oz)
- Dimensions:
- Microphone: 37.8 mm (1.49 inches) long, 12.2 mm (0.48 inch) diameter
- Power Module: 92.9 mm (3.66 inches) long, 18.9 mm (0.74 inch) diameter
- Output Connector: Integral 3-pin XLRM-type (power module)
- Cable: 4.0 m (13.1 feet) long (permanently attached to microphone), 3.2 mm (0.13 inch) diameter, 2-conductor shielded cable with TA3F-type connector
- Accessories Furnished:
- AT8542 power module
- AT8418 UniMount microphone instrument mount
- AT8468 violin mount
- Soft protective pouch
|
|
Price After Rebate
|
Guaranteed Lowest Price
| |
|
Rate and Review this Product:
 | |
|
|
|
|
|
|
|
|