|
Model Options:
Audio Technica BP896 MicroPoint Omnidirectional Lavalier MicrophoneThe BP896 MicroPoint Omnidirectional Lavaliers, from Audio Technica, deliver extremely intelligible natural audio and handles high sound pressure levels with ease. With a capsule diameter not much bigger than the head of a pin, Audio-Technica’s smallest-ever lavalier microphone virtually disappears in props or clothing to create highest-quality audio for broadcast and theater sound reinforcement.
Audio Technica BP896 Features
- Inconspicuous, lightweight capsule
- Extremely intelligible natural audio
- Handles high sound pressure levels with ease
- Rugged built for long-lasting performance
- High-pass UniSteep filter for:
- Steep low-frequency attenuation
- Improved sound pickup without affecting voice quality
- Requires 11V to 52V DC phantom power
- Includes generous accessory kit and protective case
- RoHS compliant - free from all substances specified in the EU directive on hazardous substances
Element
Its subminiature omni element is enclosed in a durable housing designed to minimize noise from handling, clothing and wind. Flip a switch to eliminate low-frequency hum without affecting intelligibility.
Audio Technica BP896 Omnidirectional Lavalier Microphone Specifications
- Element: Fixed-Charge Back Plate, Permanently Polarized Condenser
- Polar Pattern: Omni-directional
- Frequency Response: 20-20,000 Hz
- Low Frequency Roll-Off: 80 Hz, 18 dB/Octave
- Open Circuit Sensitivity: -49 dB (3.5 Mv) Re 1V At 1 Pa
- Impedance: 250 Ohms (Wired Only)
- Maximum Input Sound Level: 135 Db SPL, 1 kHz At 3% T.H.D.
- Dynamic Range (Typical): 104 Db, 1 kHz at Max SPL
- Signal-To-Noise Ratio: 63 Db, 1 kHz At 1 Pa
- Phantom Power Requirements: 11-52V Dc, 2 mA Typical
- Switch: Flat, Roll-Off (Wired Only)
- Current Consumption: 0.1 Ma Typical At 5V
- Voltage Range: 2.5-11V
- Microphone Weight: 0.005 oz (0.14 g)
- Microphone Dimensions (Length x Diameter): 0.43 x 0.10 inches (10.8 x 2.6 mm)
- Cable Dimensions (Length x Diameter): 55 x 0.06 inches (1400 x 1.6mm)
- Cable Connector: 2-Conductor Shielded Cable with Locking 4-Pin
- Included Accessories:
- Two At8157 Windscreens
- Six Element Covers (2 White, 2 Beige, 2 Black)
- Viper Clip Base
- Clothing Clip Base
- 3 Black Single Mic Holders
- 2 Black Double Mic Holders
- Belt Clip
- Carrying Case
- Included Case: Audio-Technica Case, Style-M39
Recommended Accessories for:
|
Minimum Item Quantity 1 is required to purchase.
Item Quantity exceeds the limit 0 . Questions? Feel free to Call or Chat.
|
|
|
|
|
|