- Overview
- Specs
- Manufacturer Info
- Also Purchased
- Video & Docs
Recommended Accessories
ex VAT
inc VAT
ex VAT
inc VAT
ex VAT
inc VAT
ex VAT
inc VAT
Featuring breakthrough audio and mechanical design innovations, the phantom-powered Audio Technica U851RO Condenser Boundary Mic offers outstanding speech intelligibility and transparent sound quality for surface-mount applications. This omnidirectional microphone is equipped with a PivotPoint rotating output connector, UniSteep filter and UniGuard RFI-shielding technology. It accepts interchangeable condenser elements in cardioid and hypercardioid polar patterns. With a heavy die-cast case and silicon foam bottom pads to minimize coupling of surface vibration to the microphone, the U851RO is equipped with self-contained electronics, eliminating the need for an external power module.
Audio Technica U851RO Condenser Boundary Mic Features
- Designed for surface-mount applications such as high-quality sound reinforcement, professional recording, television, conferencing and other demanding sound pickup situations
- Low-profile element provides uniform omnidirectional polar pattern with 360º acceptance angle
- PivotPoint rotating output connector allows cable to exit from either the rear or the bottom of the microphone
- UniGuard RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
- UniSteep filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
- Self-contained electronics eliminate need for external power module
- Small-diameter UniPoint capsule near boundary eliminates phase distortion and delivers clear, high-output performance
- Heavy die-cast case and non-slip silicone foam bottom pads minimize coupling of surface vibration to the microphone
- Low-profile design with low-reflectance finish for minimum visibility
Audio Technica U851RO Condenser Boundary Mic Specifications
- Element: Fixed-charge back plate, permanently polarized condenser
- Polar Pattern: Omnidirectional in hemisphere above mounting surface
- Frequency Response: 30-20,000 Hz
- Low Freq Roll-Off: 80 Hz, 18 dB/octave
- Open Circuit Sensitivity: –31 dB (28.2 mV) re 1V at 1 Pa
- Impedance: 200 ohms
- Max Input Sound Level: 132 dB SPL, 1 kHz at 1% T.H.D.
- Dynamic Range: (typical) 111 dB, 1 kHz at Max SPL
- Signal-To-Noise Ratio: 73 dB, 1 kHz at 1 Pa
- Phantom Power Requirements: 11-52V DC, 4 mA typical
- Switch: Flat, roll-off
- Weight: 262 g (9.2 oz)
- Dimensions(LxWxH): 4.25 x 3.31 x 0.91 inches
- Output Connector: TB3M-type
- Cable: 25.0 feet long, 2-conductor, shielded cable with TA3F-type and XLRM-type connectors
- Included Accessories: Soft protective pouch
|
Minimum Item Quantity 1 is required to purchase.
Item Quantity exceeds the limit 0 . Questions? Feel free to Call or Chat.
|
|
- Overview
- Specs
- Manufacturer Info
- Also Purchased
- Video & Docs
|
|