Audix
  • Audix M1255B Condenser Choir Microphone


  • Overview
  • Specs
  • Manufacturer Info
  • Also Purchased
  • Video & Docs
Recommended Accessories
http://www.americanmusical.com/Item--i-CBI-LowZ-Microphone-Cable
ex VAT   inc VAT  


http://www.americanmusical.com/Item--i-On-Stage-Stands-7701B-Tripod-Boom-Microphone-Stand
ex VAT   inc VAT  




The Audix M1255B is a high output, miniature condenser mic designed for choir and overhead stage applications that require exceptional coverage and unsurpassed audio fidelity. Unlike choir mics that are more like large lavalier mics with a long cable, the M1255B is a miniature version of the Audix SCX1 studio condenser mic, widely regarded as one of the best overhead/instrument condenser mics in the world.


Audix M1255B Condenser Choir Microphone Features
  • Overhead mic for choir, group vocal
  • Acoustic instruments
  • Ambient room micing
  • Symphonic area micing
  • Speech, presentation
  • Requires Phantom Power 18-52 volts
The M1255B features a fully integrated preamp and was designed with very high sensitivity for effective distance micing. Since the mic preamp is built right into the capsule, the audio signal is balanced right from the capsule output, allowing for cable runs up to 1000 feet, with no noise or loss of high frequencies. The M1255B's cardioid pattern and power make it an exceptional choice for choir, overhead stage, or audience micing.

The M1255B has complete immunity from RF interference caused by cell phones and GSM devices and the black matte finish minimizes glare in video applications. The M1255B requires 18-52 volts phantom power and ships with a 25 foot cable (mini XLR to standard XLR connector), mic stand clip, hanging clip with adjustable tilt, windscreen, and carry pouch.


Audix M1255B Condenser Choir Microphone Specifications
  • Transducer Type: Condenser
  • Frequency Response: 50 Hz - 19 kHz
  • Polar Pattern: Cardioid
  • Output Impedance: 150 ohms
  • Sensitivity: 32 mV / Pa at 1k
  • Signal/Noise Ratio (A-weighted) : 73 dB
  • Equivalent Noise Level (A-weighted): 21 dB
  • Maximum SPL at .5% THD: greater than 130 dB
  • Dynamic Range: 109 dB
  • Power Requirements: 18 - 52 volt phantom power
  • Connector: 3 pin mini-XLRm
  • Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
  • Housing /Finish: Machined brass /Black Powder coat
  • Weight: 20 g / 0.7 ounces
  • Length: 54 mm / 2.1 inches



 
 
FREE 12 month Extended WarrantyFree ShippingBuy it on EZ Payments!Item Can Ship To Canada
ex VAT   inc VAT
 

 
Notify Me!
Quantity:
Add to Cart
Add to Wish List  
 

ShareThis
  • Overview
  • Specs
  • Manufacturer Info
  • Also Purchased
  • Video & Docs
Loading....