B52 Matrix 1000V2 Active PA Sound SystemB-52 Matrix 1000 V2 PA Sound System; For a Variety of Audio Needs from Monitoring to Live Sound to DJ Applications!
Two 10 inch mains AND a 15 inch subwoofer... The Matrix 1000 V2 System is beyond your average portable PA featuring 700, mind blowing, watts to power this active loudspeaker system. Complete sound reinforcement solution the Matrix 1000 V2 provides three-channels built right into the amplifier featuring volume controls (per channel), an electronic crossover with equalization and a VCA compressor. Integration is key, the circuitry is fine-tuned to the components for the best possible sound with no need to adjust a crossover or compressor to get the best possible sound. Roll the system into place on its heavy duty casters, plug in the AC, connect two speaker cables and run XLR cables to your mixer and get ready to be blown away by this compact inexpensive PA solution!
B-52 Matrix 1000 V2 Features
- 700 Watts with built in 3 channel mixing
- 15 inch sub and two 10 inch mains to cover everything from highs to lows
- High-performance compression driver for a smoother frequency response and lower distortion throughout the upper mid-range frequencies
- Elliptical wave guide with more uniform dispersion
- Voltage controlled amplifier (VCA) on all 3 amp channels to minimize clipping and lower distortion at VERY high drive levels provides extra speaker protection
- Improved B-52 handles
- Includes a durable dust cover
Stack, Rock and Roll
To transport the MATRIX 1000 V2, simply set the subwoofer on its casters and place the satellite speakers on to the subwoofer’s front panel, facing down. Fasten the satellites with the included locking strap using the handles on either side of the subwoofer cabinet. Place the included cover over the entire system and you’re ready to move the MATRIX 1000 V2 with ease.
System Design
10 inch Two-Way Satellites, Pole Mountable, Flyable Or Angled For Use As Stage Monitors
The MATRIX 1000 V2 satellites are loaded with a custom designed 10 inch speaker and 1 inch titanium diaphragm compression driver. The
horn is a 900 by 600 elliptical waveguide that can be rotated 900 to optimize the dispersion pattern to best suit your particular application. These versatile speakers are pole-mountable and can sit as stage monitors. They also include 3/8 inch, 16 tpi flying hardware for small venue permanent installations. The rounded front of the satellite speaker is a perfect fit for the convex face of the subwoofer, allowing a mobile entertainer to stack, roll and transport the entire MATRIX 1000 V2 in and out of a venue in record time.
Built-in 700-watt three-channel amplifier
The 15 inch subwoofer enclosure has two separate compartments. The front chamber serves as the cabinet for the custom B-52 15 inch subwoofer. The rear chamber houses all of the MATRIX 1000 V2’s electronic circuitry. This includes a 400-watt amplifier for the subwoofer, 2 x 150-watt amplifiers for the satellites, electronic crossover, VCA compressor, electronic equalization, pre-amp and power supply.
Suggested Applications
- Mobile DJ
- Karaoke
- Nightclub, Restaurant, Bar Installation
- Corporate Audio/Video in Home Entertainment System
- Live Sound System
- Stage Monitoring System
- Booth Monitoring System
- Drum Monitoring
