Behringer Ultragraph Pro FBQ6200 EqualizerThe
flagship Behringer FBQ6200 Ultragraph Pro is an ultra-musical 31-band stereo graphic EQ that goes the distance to offer a maximum in performance and flexibility both live and in the studio. Its patent-pending feedback detection system instantly reveals feedback frequencies and also can be used as an audio analyzer. A whole battery of superb features includes dedicated limiters with meters for each channel; a pink noise generator; a mono subwoofer output; and sweepable high and low cut filters for each channel. Level setting is no sweat thanks to 8-digit LED I/O metering and input gain control. Top-drawer components include ultra low-noise op-amps, servo balanced 1/4 inch TRS & gold-plated XLR I/Os and relay-controlled hard-bypass. Expect lasting reliability with the high quality illuminated 45-mm faders and detent ALPS pots.
FBQ Feedback Detection
The FBQ Feedback Detection System lets you immediately recognize and eliminate feedback frequencies. Unlike other systems, it is extremely fast-acting, responding within milliseconds. Plus it works as a spectrum analyzer. A spectrum analyzer helps to identify frequency areas whose energy levels are significantly higher or lower than the rest of the musical program. This feedback is often caused by specific room acoustics or characteristics of your sound system.
Our amazing FBQ Feedback Detection System helps you to easily detect and smooth out these irregularities during the sound check and you're ready and done with when the show starts. Once you've got the critical frequencies under control, your system is efficiently protected against feedback and tuned to offer maximal gain reserve.
Behringer FBQ6200 Features
- Professional 31-band stereo Graphic Equalizer for both live and studio applications
- Revolutionary, patent-pending FBQ Feedback Detection System instantly reveals critical frequencies and can also be used as Audio Analyzer
- Dedicated limiters with gain reduction meters for each channel protect your sound system from overload and distortion
- Pink noise generator provides test signals for equalizing your sound system to any room acoustics
- Mono subwoofer output with dedicated level control and adjustable crossover frequency
- Additional sweepable high and low cut filters for each channel remove unwanted frequencies e.g. floor rumble, tape hiss, etc.
- Highly accurate 8 digit LED input/output metering and input gain control for easy level setting
- Ultra low-noise audio operational amplifiers offer outstanding sound performance
- Relay-controlled hard-bypass with an auto-bypass function during power failure (failsafe relay)
- Servo-balanced inputs and outputs with 1/4 inch TRS and gold plated XLR connectors
- High quality illuminated 45mm faders, detent ALPS potentiometers and illuminated switches for long-term reliability
- Shielded toroidal power transformer for ultra low-noise performance
- Extremely rugged all metal chassis ensures long life even under the most demanding conditions
- Designed in Germany. Manufactured under ISO9000 certified management system
Behringer FBQ6200 Specifications
- Audio Inputs:
- Type: RF-filtered, servo balanced XLR and ¼” TRS connectors
- Impedance: 40k ohms balanced and unbalanced
- Maximum Input Level: +21 dBu balanced and unbalanced
- Audio Outputs:
- Type: Servo-balanced XLR and ¼” TRS connectors
- Subwoofer Out: Balanced XLR connector, level variable off to 0 dB
- Crossover Frequency: variable, 30-200Hz
- System Specifications:
- Frequency Response: 10Hz to 30kHz, +/- 3 dB
- Signal to Noise Ratio: 22 Hz to 22 kHz > 94 dB @+4 dBu
- THD: Typical 0.006% @ +4 dBu, 1 kHz, Gain 1
- Crosstalk: Typical –65 dB @ 1 kHz
- Roll-Off Filtersection:
- Type: 12 dB/octave, Butterworth
- Input: variable (-15 dB to +15 dB)
- Low Cut: variable (10 Hz to 400 Hz)
- High Cut: variable (2.5 kHz to 30 kHz)
- Graphic Equalizer:
- Type: Analog 31-band equalizer
- Frequency Range: 20 Hz to 20 kHz in 31 1/3-octave bands (ISO frequencies)
- Bandwidth: 1/3 octave
- Control Range: +/-6 dB or +/-12 dB (switchable)
- Limiter Section:
- Attack/Release: 20 msec/ 90 msec
- Threshold: variable, -6 dB to +22 dB (off)
- LED Meter: Gain Reduction 20/10/3/1 dB
- Noise Generator:
- Type: Pink noise, level variable, off to 0 dBu
- LED Level Meter: -24/-12/-6/0 dB
- Function Switches:
- FBQ: activates the FBQ Feedback Detection System
- Audio In/Out: switch to bypass the equalizer functions
- I/O Meter In/Out: Switches the meter display from input to output
- Range: shift of the maximum cut/boost range for all 31/15 bands
- Limiter: activates the limiter
- Pink Noise: activates the noise generator
- Subwoofer: activates the subwoofer output
- Indicators:
- Input/Output Level: 8-Segment LED display: -24/-18/-12/-6/0/+6/+12 dB/CLIP
- Subwoofer: 4-segment LED display: -18/-12/0/+12 dB
- Power Supply:
- Mains Voltage: 120V~, 60 Hz
- Power Consumption: 35 W
- Fuse: T 630 mA H
- Mains Connection: Standard IEC Receptacle
- Dimensions: 5 ¼” H x 19” W x 5 7/8” D
- Weight: 5.95 lbs
