|
|  | | Behringer |
 
Behringer Autocom Pro XL MDX1600 ProcessorNow, for less than the price of a handful of good cables, you can dramatically improve the sound and impact of your mix with a powerful dynamics processor. The new Autocom Pro-XL is an Interactive reference-class 2-channel Expander/Gate/Compressor/Peak limiter with an integrated Dynamic Enhancer, De-esser and Low Contour Filter. This combination of features, plus automatic and manual interactive controls makes it a powerful tool that's easy to operate. The automatic voice-adaptive De-esser with male/female voice recognition removes those hideous "S" sounds from vocals and sibilance from overly bright signal sources. The onboard Expander provides virtually inaudible noise suppression, even under heavy compression. Other features include switchable hard bypass and XLR & 1/4" inputs & outputs. The AUTOCOM PRO-XL MDX1600 is loaded with many of the same features as the COMPOSER PRO-XL. Additionally it features a unique adjustable IDE dynamic enhancer that provides subtle and very musical compensation for the bass “boost” effect that results from heavy compression.
Behringer Autocom Pro XL MDX1600 Features
- Switchable IKA (Interactive Knee Adaptation) program-adaptive compression circuitry combines the advantages of hard-knee and soft-knee characteristics
- Adjustable dynamic enhancer with level meter for brilliant, lively audio even with heavy compression
- IGC (Interactive Gain Control) peak limiting circuitry combines clipper and program limiter for reliable and inaudible protection against signal peaks
- Switchable de-esser removes excessive sibilance from your vocal tracks
- IRC (Interactive Ratio Control) expander/gate circuitry for virtually inaudible noise suppression
- Automatically or manually adjustable attack and release times
- Switchable low contour filter prevents "pumping" due to low-frequency dominated compression
- Stereo couple function with independent output level settings
- Switchable side chain input with side chain monitor function
- Ultra low-noise 4580 operational amplifiers and state-of-the-art THAT® VCA's
- Separate 12-segment LED meters for input/output levels and gain reduction
- Dedicated "traffic light" threshold and enhancer level displays
- High-quality detented ALPS® potentiometers and illuminated switches
- Servo-balanced inputs and outputs with 1/4" TRS and gold-plated XLR connectors
- Manufactured under ISO9000 certified management system
Behringer MDX1600 Specifications
Audio Inputs
- Type: XLT and 1/4" TRS connectors, HF-shielded, servo-balanced
- Impedance:
- +4dBu: 90 kOhms balanced, 45 kOhms unbalanced @ 1kHz
- -10dBv: 180 kOhms balanced, 90 kOhms unbalanced@ 1kHz
- Operating Level: +4dBu/-10dBV (switchable)
- Maximum Input Level: +22dBu balanced and unbalanced
- CMRR (typical): 40dB, >60dB @ 1kHz
Audio Outputs
- Type: XLR and 1/4" TRS connectors
Electronically controlled servo-balanced output stage
- Impedance: 95 Ohms balanced, 50 Ohms unbalanced @ 1kHz
- Maximum Output Level: +21dBu, +20dBm balanced and unbalanced
Sidechain Inputs
- Type: 1/4" TS connector, unbalanced, HL-shielded, DC de-coupled
- Impedance: 45 kOhms
- Maximum Input Level: +24dBu
Sidechain Outputs
- Type: 1/4" TS connector, unbalanced, HL-shielded, DC de-coupled
- Impedance: 50 kOhms
- Maximum Input Level: +21dBu
System Specifications
- Bandwidth: 20Hz to 20kHz, +0/-0.5dB
- Frequency Range: 0.35Hz to 200kHz, +0/-3dB
- S/N Ratio: 115dB unweighted, 22Hz - 22kHz
- THD:
- 0.008% typical @ +4dBu, 1kHz, gain 1
- 0.07% typical @ +20dBu, 1kHz, gain 1
- IMD: 0.01% typical SMPTE
- Crosstalk: -110dB @ 1kHz
Expander/Gate Section
- Type: IKA (Interactive Knee Adaptation) compressor
- Threshold: Variable (-40 to +20dB)
- Ratio: Variable (1:1 to infinity:1)
- Attack/Release: Variable: (manual or automatic)
- Auto Characteristic: Wave adaptive compressor
- Manual Attack Time: Variable (0.3 msec./20dB to 300 msec./20dB)
- Auto Attack Time: 15 msec. for 10dB, 5 msec. for 20dB, 3 msec. for 30dB typ.
- Auto Release Time: Program-dependent, typ. 125dB/sec
- Output: Variable (-20 to +20dB)
Peak Limiter Section
- Type: IGC (Interactive Gain Control) peak limiter
- Level: Variable (0dB to OFF (+21dB))
- Ratio: Infinity:1
- Level 1 Limiter Type: Clipper
- Attack: "Zero"
- Release: "Zero"
- Level 2 Limiter Type: Program limiter
- Attack: Program-dependent, typ. <5 msec.
- Release: Program-dependent, typ. 20dB/sec
De-Esser Section
- Type: VAD (Voice-Adaptive De-esser)
- Filter Frequency: 5-8kHz
- Filter Bandwidth: Program-dependent
- Level Reduction: Maximum 15dB
Dynamic Enhancer Section
- Type: IDE (Interactive Dynamic Enhancer
- Filter Frequency: 2.5kHz (lower cut-off frequency)
- Characteristic: High-pass filter (6dB/octave)
- Boost: Variable, maximum 40dB @ 7.5kHz
Power Supply
- Mains Voltage: 120 V ~, 60Hz
- Power Consumption: Maximum 15 Watts
- Fuse: T 250 mA H
- Mains Connection: Standard IEC receptacle
Physical
- Dimensions (approx): 1-3/4 x 19 x 8-1/2" (44.5 x 482.6 x 217mm)
- Weight (approx.): 4.62 lbs. (2.1 kg)
- Shipping Weight (approx): 6.6 lbs (2.2 kg)
Behringer makes every effort to ensure the highest standard of quality. Necessary modifications are carried out without notice. Thus, the specifications and design of the device may differ from the information given here.
|
|
|