Brace Audio DWG 1000 Digital Wireless Guitar SystemBrace Audio DWG 1000 Digital Wireless Guitar System; Get your full signal to your amp with pristine quality digital audio. The DWG 1000 converts your signal, in its full form, to a strong digital signal and sends it from the transmitter module to the receiver without worry of signal loss. With its 2.4G Hz spread spectrum transmission, the converted audio signal is passed wirelessly to the receiver where it’s converted back to a reflection of the original signal with all of the original instrument frequencies intact. Brace Audio’s design gives you a hassle free signal that is without the hiss, crackle, signal loss, and RF interference you will find in outdated UHF/VHF systems.
Brace Audio DWG 1000 Features - Freedom to perform without the restriction of guitar cables
- Operates without the signal loss and interference you find in analog systems
- Up to four units can operate at one time
- 2.4G Hz spread spectrum transmission
- Recommended for both electric and acoustic-electric guitarists
Guitar cables have been known to contribute to signal loss, the DWG 1000 is recommended for guitarists from all sides of the spectrum. Both electric and acoustic-electric guitarist will benefit with a better over all sound, so the DWG 1000 wireless system is not just for not just for artists who use stage acrobatics in their act.
Enjoy the freedom of performing without the restriction of guitar cables. Never again will you be limited by cable length, worried about yanking the cable out of your amp, or mistakenly dragging your effects boxes across the stage. And up to four units can operate at one time, so everyone in the band can use one.
Consumer Alert!
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones
Note:All of the wireless systems that AMS sells comply with the FCC guidelines and regulations.We are presenting this information as a matter of legally required disclosure.
Recommended Accessories for: