|
CAD PDMK7 Pro 7-Piece Drum Microphone PackageThe CAD PDMK7 package is your all-in-one solution for mikng your complete drum set. With the PDMK7, your sound will have definition and clarity in the mix. Your bass will have that great low end to drive the music with the toms and snare covered too. Plus there are overhead microphones for that mixture of the drums that really defines your playing style. The included clips are the perfect solution for close-miking providing low visibility and reducing drum vibration.
CAD PDMK7 Drum Microphone Package Includes
- 3 - E60 Tom/Snare Microphones (Applications: acoustic instrument, guitar cabinets, bass cabinets, strings, piano, cymbals/overheads, kick drum, snare drum, Hi-hat)
- 2 – E70 Overhead Microphones (Applications: choir, orchestra, acoustic instrument, guitar cabinets, strings, piano, cymbals/overheads, Hi-Hat.
- 1 - TSM411 Microphone (Applications: brass, guitar cabinets, bass cabinets, snare drum, rack/floor toms)
- 1 - KBM412 Bass Microphone (Applications: bass cabinet, kick drum, rack/floor toms)
- 4 - DSM1 drum shock mount
- 1 - Vinyl carrying case
CAD e60 Specifications
- Type: Front address, externally biased condenser
- Frequency Response: 30Hz - 20kHz (with low end boost)
- Polar Pattern: Cardioid
- Impedence: Low (300 ohms nominal)
- Open Circuit Voltage: -54dB (0dB = 1 volt per microbar)
- Dynamic Range: 125dB
- Equivalent Noise Level: 13dB Equivalent SPL, A weighted
- Maximum SPL: 138dB SPL (with pad on)
- Total Harmonic Distortion: Less than 0.15%
- Powering: 24 - 52 Volts Phantom Power
- Connector: Gold plated 3-pin XLR type
- Finish: Durable Black leather feal uerethane housing with black grille screen
- Net Weight: 9.5oz. (270 grams)
CAD E70 Specifications
- Operating Principle: Condenser
- Polar Pattern: Cardioid and omnidirectional
- Frequency Response: 20Hz to 20KHz
- Sensitivity: -39dBV (11mV) @ 1 Pa
- Impedance: 85 ohms
- Max SPL: 145dB, 1% THD, attenuator engaged
- Self Noise: 23dBA
- Hi-pass Filter: 75Hz and 150Hz, 6dB/oct
- Attenuator: 10dB and 20dB
- Power Requirements: P48, 2mA
- Includes: elastic shock mount, stand clamp and windscreen.
CAD TSM411 Specifications
- Operating Principle: Moving coil dynamic
- Polar Pattern: Supercardioid
- Frequency Response: 100Hz to 15KHz
- Sensitivity: -56dBV (1.6mV) @ 1 Pa
- Impedance: 310 ohms
CAD KBM412 Specifications
- Operating Principle: Moving coil dynamic
- Polar Pattern: Cardioid
- Frequency Response: 30Hz to 12KHz
- Sensitivity: -66dBV (0.5mV) @ 1 Pa
- Impedance: 60 ohms
Recommended Accessories for:
|
Minimum Item Quantity 1 is required to purchase. Item Quantity exceeds the limit -1 . Questions? Feel free to Call or Chat.
Rate and Review this Product:
|
|
|
|
|
|