Model Options:
- Overview
- Specs
- Manufacturer Info
- Also Purchased
- Video & Docs
Recommended Accessories
ex VAT
inc VAT
ex VAT
inc VAT
ex VAT
inc VAT
ex VAT
inc VAT
Crown XLS602D Power Amplifier is engineered with mobile DJs and musicians in mind.
The XLS602D, like other Crown amplifiers, boasts first-class reliability and a number of significant features. including a high-pass filter (30Hz/15Hz/Off) and clip limiter on each channel enabling the amp to work more efficiently as well as safely. With its rugged, all-steel 2U chassis, each XLS series amp employs efficient cooling with its internal forced air fan. Clip indicating LEDs for each channel give you the status of possible power and fault conditions. Connections include XLR inputs and touch-proof binding post outputs.
Crown XLS602D Features
- Reliable design incorporates many popular features
- Housed in a rugged, all-steel 3U chassis
- Efficient forced-air fans prevent excessive thermal buildup
- Balanced XLR inputs; touch-proof binding post and Speakon outputs
- Precision detented level controls, power switch, power LED, 6 signal LEDs
- Three-Year, No-Fault, Fully Transferable Warranty!
The XLS Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. The line consists of three models in a uniform, rugged chassis, incorporating the best of tried-and-true design principles and innovative features. XLS Series amplifiers are professional stereo power amplifiers engineered to meet demanding audio requirements—reliably and within budget. Plus, every XLS Series amplifier is backed by Crown’s unequaled Three-Year, No-Fault, Fully-Transferrable Warranty that covers everything. With over five decades of experience designing and building rock-solid products, Crown is the standard in amp technology. So check out the affordable, Crown XLS Series. They are a powerful argument for quality and value!
All Crown XLS power amplifiers come with a 3 year, No-Fault, Fully Transferable Warranty!
|
Crown XLS Power Output Comparison Chart*
|
|
Stereo |
Bridge-Mono |
| 8 Ohm |
4 Ohm |
8 Ohm |
| XLS 5000 |
1100W |
1800W |
3600W |
| XLS 802 |
500W |
800W |
1600W |
| XLS 602 |
380W |
600W |
1200W |
| XLS 402 |
300W |
450W |
900W |
| XLS 202 |
200W |
300W |
600W |
|
*Maximum average power in watts at 1 kHz with 0.5% THD.
|
Crown XLS602D Power Amplifier Specifications
Performance
- Sensitivity: 1.25 Volts RMS (full rated power; 4 ohms)
- Frequency Response: +0 dB, -0.8 dB (at 1 watt; 22 Hz to 20 kHz)
- Signal-to-Noise Ratio: 20 Hz to 20 kHz
- A-weighted, below rated power: > 98 dB
- No weighting, below rated power: > 93 dB
- Crosstalk: (below rated power)
- at 1 kHz: -76 dB
- at 20 kHz: -58 dB
- Input Impedance (nominal):
- 20 kohms balanced
- 10 kohms unbalanced
- Load Impedance:
- 4 to 8 ohms Stereo (per channel)
- 8 ohms in Bridge Mono
- AC Line Voltage and Frequency Configurations (±10%):
- 120 VAC 60 Hz
- 100 VAC 50/60 Hz
- 220 VAC 50 Hz
- 230-240 VAC
- Total Harmonic Distortion (THD): < 0.5%
- Intermodulation Distortion (IMD): Full rated output to -40 dB: < 0.3%
- Damping Factor (8 ohm): > 200 (10 Hz to 400 Hz)
Controls
- Level: Two front-panel rotary level controls, one for each channel
- Power: Front-panel switch; on when in the IN position
- Circuit Breaker: Back-panel breaker provides overload protection
- Mode Switch: Back-panel switch selects Dual or Bridge-Mono mode
Indicators
- Signal: Two green LEDs, illuminate when channel input exceeds -40 dBu
- Clip: Two red LEDs, illuminate when the channel output is overdriven
- Power: Blue LED indicates amp is on and AC power is available
- Fault: Two red LEDs illuminate when amplifier is in protect mode
Input/Output
- Output Connectors:
- Two 4-Pole Speakon Output Connectors (2 or 4 pole)
- One pair of binding posts per channel; (banana plugs or bare wire)
- Input Connectors: 3-pin female XLR input connectors (one per channel)
Protection and Cooling
- Extensive Protection and Diagnostic Capabilities:
- Output current limiting
- DC protection
- Circuit breaker
- Thermal protection
- Ventilation: Flow-through ventilation from front to back
- Heat sinks: Internal heat sinks with forced-air cooling
- Air Volume Requirements: 80.15 ft³ (2.27 m³) per minute per unit
Size and Weight
- Dimensions:
- Width: 19 inches (48.3 cm) EIA Standard rackmount
- Height: 3.5 inches (8.9 cm) 2U rackmount
- Depth: 15.2 inches (38.6 cm)
- Weight 29 lbs (13.2 kg)
Specifications apply to units in Stereo mode with 8-ohm loads unless otherwise specified.
|
Minimum Item Quantity 1 is required to purchase.
Item Quantity exceeds the limit 0 . Questions? Feel free to Call or Chat.
|
|
- Overview
- Specs
- Manufacturer Info
- Also Purchased
- Video & Docs
|
|