 |
 |
 |
 |
 |
 |
 |
 |
|
| Call Us 24/7 At: 1-800-458-4076 |
|
|
|
|
|
|
|
|
|
|
|
|
|  | | Crown |
Model Options:
Crown XLS 802 Power AmplifierThe Crown XLS802 Power Amplifier; Powerful, high-quality audio amplification!
The Crown XLS802 is one of a distinctive line of Crown power amplifiers that incorporate the best of tried-and-true amp design principles and innovative features. Encased in a rugged, 2U, rack-mount housing, the XLS802 amplifier is a professional stereo power amplifier that has been painstakingly engineered to meet requirement and reliability standards at a price that makes it affordable to more pro-audio consumers.
Crown XLS802 Features
- Reliable design incorporates many popular features
- Housed in a rugged, all-steel 3U chassis
- Efficient forced-air fans prevent excessive thermal buildup
- Balanced XLR inputs; touch-proof binding post and Speakon outputs
- Precision detented level controls, power switch, power LED, 6 signal LEDs
- Three-Year, No-Fault, Fully Transferable Warranty!
With over five decades of experience designing and building rock-solid products, Crown is the standard in amp technology. So check out the affordable Crown XLS Series. They are a powerful argument for quality and value!
All Crown XLS power amplifiers come with a 3 year, No-Fault, Fully Transferable Warranty!
|
Crown XLS Power Output Comparison Chart*
|
|
Stereo |
Bridge-Mono |
| 8 Ohm |
4 Ohm |
8 Ohm |
| XLS 5000 |
1100W |
1800W |
3600W |
| XLS 802 |
500W |
800W |
1600W |
| XLS 602 |
380W |
600W |
1200W |
| XLS 402 |
300W |
450W |
900W |
| XLS 202 |
200W |
300W |
600W |
|
*Maximum average power in watts at 1 kHz with 0.5% THD.
|
Crown XLS5000 Power Amplifier Specifications
Performance
- Sensitivity: 1.25 Volts RMS (full rated power; 4 ohms)
- Frequency Response: +0 dB, -0.8 dB (at 1 watt; 22 Hz to 20 kHz)
- Signal-to-Noise Ratio: 20 Hz to 20 kHz
- A-weighted, below rated power: > 98 dB
- No weighting, below rated power: > 93 dB
- Crosstalk: (below rated power)
- at 1 kHz: -76 dB
- at 20 kHz: -58 dB
- Input Impedance (nominal):
- 20 kohms balanced
- 10 kohms unbalanced
- Load Impedance:
- 4 to 8 ohms Stereo (per channel)
- 8 ohms in Bridge Mono
- AC Line Voltage and Frequency Configurations (±10%):
- 120 VAC 60 Hz
- 100 VAC 50/60 Hz
- 220 VAC 50 Hz
- 230-240 VAC
- Total Harmonic Distortion (THD): < 0.5%
- Intermodulation Distortion (IMD): Full rated output to -40 dB: < 0.3%
- Damping Factor (8 ohm): > 200 (10 Hz to 400 Hz)
Controls
- Level: Two front-panel rotary level controls, one for each channel
- Power: Front-panel switch; on when in the IN position
- Circuit Breaker: Back-panel breaker provides overload protection
- Mode Switch: Back-panel switch selects Dual or Bridge-Mono mode
Indicators
- Signal: Two green LEDs, illuminate when channel input exceeds -40 dBu
- Clip: Two red LEDs, illuminate when the channel output is overdriven
- Power: Blue LED indicates amp is on and AC power is available
- Fault: Two red LEDs illuminate when amplifier is in protect mode
Input/Output
- Output Connectors:
- Two 4-Pole Speakon Output Connectors (2 or 4 pole)
- One pair of binding posts per channel; (banana plugs or bare wire)
- Input Connectors: 3-pin female XLR input connectors (one per channel)
Protection and Cooling
- Extensive Protection and Diagnostic Capabilities:
- Output current limiting
- DC protection
- Circuit breaker
- Thermal protection
- Ventilation: Flow-through ventilation from front to back
- Heat sinks: Internal heat sinks with forced-air cooling
- Air Volume Requirements: 80.15 ft³ (2.27 m³) per minute per unit
Size and Weight
- Dimensions:
- Width: 19 inches (48.3 cm) EIA Standard rackmount
- Height: 3.5 inches (8.9 cm) 2U rackmount
- Depth: 15.2 inches (38.6 cm)
- Weight: 35.5 lbs (16.1 kg)
Specifications apply to units in Stereo mode with 8 ohm loads unless otherwise specified.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|