|
|
Model Options:
2 Review (s) - 3 Rating (s)
DBX 215 Dual 15 Band Graphic EqualizerThe dbx 215 Graphic Equalizer has been designed to meet the needs of the most demanding sound reinforcement environments, while offering the simplicity of straight forward controls.
The 215 not only provides standard features like dual channels, 15 2/3 octave bands, ISO frequency meters, +/- 12dB input gain range, and switchable 50Hz/12dB octave low-cut filters, but also includes other thoughtful features. These features include: 20 mm faders; selectable +/-6dB or +/-12dB boost/cut range for precise gain adjustments; XLR, and 1/4 inch TRS connectors for installation ease; balanced inputs and outputs for quiet operation; and chassis/signal ground lift capabilities for quick hum isolation. The visionary design of the dbx 215 has been pursued to make your job easier.
Features
- Two 15-band, 2/3-octave Constant Q frequency bands
- Switchable boost/cut ranges of ±6 or ±12 dB
- 12dB per octave, 3dB down @ 50Hz low-cut filter
- Front panel bypass switch
- ±12 dB input gain range
- 4-segment LED ladders for monitoring output levels
- XLR and TRS Inputs and Outputs
- Internal Toroidal Transformer
- Frequency Response of <10 Hz to >50kHz
- Dynamic range of greater than 108dB
DBX 215 Specifications
Inputs
- Connectors: 1/4 inch TRS, female XLR (pin 2 hot)
- Type: Electronically balanced/unbalanced, RF filtered
- Impedance: Balanced 40k ohm, unbalanced 20k ohm
- Max Input Level: >+21dBu balanced or unbalanced
- CMRR: >40dB, typically >55dB at 1kHz
Outputs
- Connectors: 1/4 inch TRS, male XLR (pin 2 hot)
- Type: Impedance-balanced/unbalanced, RF filtered
- Impedance: Balanced 100 ohm, unbalanced 50 ohm
- Max Output Level: >+21dBu balanced/unbalanced into 2k ohm or greater
- >+18dBm balanced/unbalanced (into 600 ohm)
System Performance
- Bandwidth: 20Hz to 20kHz, +0.5/-1dB
- Frequency Response: <10Hz to >50kHz, +0.5/-3dB
- Dynamic Range: 108dB
- Signal-to-Noise: 90dB
- THD+Noise: <0.004%
- nterchannel Crosstalk: <-80dB, 20Hz to 20kHz
Function Switches
- EQ Bypass: Bypasses the graphic equalizer section in the signal path
- Low Cut : Activates the 50Hz 12dB/octave high-pass filter
- Range: Selects either +/- 6dB or +/- 12dB slider boost/cut range
Power Supply
- Operating Voltage: 100VAC 50/60Hz, 120VAC 60Hz, 230VAC 50/60Hz
- Power Consumption: 12W
- Mains Connection: IEC receptacle
Note: Specifications subject to change without notice. Recommended Accessories for:
|
Minimum Item Quantity 1 is required to purchase. Item Quantity exceeds the limit -1 . Questions? Feel free to Call or Chat.
Rate and Review this Product:
 3 people rated this item DF from Seattle, WA Overall Ranking:
Subject:
Paul from Malden,MA,USA paul_yu86@yahoo.com Overall Ranking:
Subject:
|
|
|
|
|
|