DBX iEQ-31 Dual 31-Band Graphic Equalizer-LimiterThe dbx iEQ31 has an EQ heritage that has produced countless industry-standard patents and dates back more than 30 years.
The dbx iEQ31 easily lives up to the dbx legacy of uncompromised sonic integrity. In addition to unsurpassed equalization specs, the iEQ-31 also offers the built-in necessities which include AFS feedback Suppression, Type V noise reduction and PeakStopPlus limiting.
Besides including two 31-band channels of 1/3-octave equalization, the iEQ-31 also offers +12 dB input gain range; switchable +6 or +15 dB boost/cut range, 40mm faders, XLR, 1/4-inch and Euroblock inputs and outputs, nonconductive nylon sliders; and an intuitive user interface with comprehensive output and gain reduction metering. As always, the inevitable result of dbx' meticulous attention to detail and top-quality componentry is exceptional sound, performance, and reliability.
dbx iEQ31 Features
- Advanced Feedback Suppression (AFS)
- Type V Noise Reduction
- PeakStopPlus Limiting
- 1/3-octave Constant Q frequency bands
- Switchable boost/cut ranges of ±6 or ±15dB
- 18 dB per octave 40Hz low-cut filter
- ±12dB input gain range
- XLR, TRS and Euroblock Inputs and Outputs
- Internal Toroidal Transformer
- Dyanmic range of greater than 113dB
- User Power Up Features
- Relay Bypass for Power Failure System Protection
The dbx iEQ series represents a major step forward in the performance of graphic equalizers. The iEQ series is now able to offer state-of-the-art digital EQ performance and specs with an analog look and feel. From its amazing 10Hz to 22kHz frequency response, to its 113dB dynamic range and Advanced Feedback Suppression (AFS), dbx proprietary Type V noise reduction and PeakStopPlus limiting, the iEQ-31 offers out of this world specifications with a down-to-earth price point. Sure to find a home in the studio, on tour and with installed sound venues, the iEQ-31 is destined to take its rightful place in the lineage of great dbx signal processors that are the professional’s choice in signal processing. With such pristine design and quality, the iEQ-31 offers the maximum sonic flexibility in a straight forward interface and rock-solid construction.
dbx IEQ31 Specifications
Input
- Connectors: 1/4 inch TRS, female XLR (pin 2 hot), and Euroblock
- Type: Electronically balanced/unbalanced, RF filtered
- Impedance: Balanced 40k ohm, unbalanced 20k ohm
- Maximum Input Level: >+22dBu balanced or unbalanced
- CMRR: >40dB, typically >55dB at 1kHz
Outputs
- Connectors: 1/4 inch TRS, male XLR (pin 2 hot), and Euroblock
- Type: Balanaced/unbalanced, RF filtered
- Impedance: Balanced >120 ohm, unbalanced >60 ohm
- Maximum Output Level: >+20dBu balanced/unbalanced into 2k ohm or greater
System Performance
- Frequency Response: 20Hz to 20kHz, +0.5/-0.25dB
- Dynamic Range: >113dB, A weighted
- THD+Noise: <0.003%, typical at +4dBu, 1kHz
- Interchannel Crosstalk: <-80dB, 20Hz to 20kHz
- Noise Reduction: Up to 10dB of dynamic broadband noise reduction
- Digital Resolution: 24 bits
- Sample Frequency: 48khz
- Latency: 2msec
Other
- Operating Voltage: 120VAC 60Hz, 220-240VAC 50/60Hz
- Power consumption: 17W
- Main Connection: IEC receptacle
- Dimensions: 5.25 H x 19 W x 7.9 D inches
Note: Specifications subject to change without notice.
