Egnater Tourmaster 4100 All Tube Guitar Amplifier Head

Egnater Tourmaster 4100 All Tube Guitar Amplifier Head

Egnater's flagship guitar amp, the Tourmaster 4100, has four distinct channels of all-tube tone that give you the power to conjure virtually any sound imaginable from country twang, bluesy breakup, raunchy crunch to metallic roar. You get all this versatility with straight-forward, user-friendly controls that make it easy to find the tone in your head.

Egnater Tourmaster 4100 Guitar Amplifier Head Features

• 100-Watt All-Tube Head
• Four Channels with Selectable Voicing
• Power Grid: Set Wattage for Each Channel from 10w to 100w
• Tube-Driven Assignable Effects Loop
• Tube-Driven Reverb
• Rugged Six-Button Footswitch
• Tubes: 8 x ECC83S & 4 x 6L6

Channels
Clean/Vintage 1 is the cleanest channel, while Clean/Vintage 2 loosens the reigns a bit, responding with smooth, buttery overdrive when pushed. Overdrive 1 is the ultimate crunch channel, articulate and percussive with a powerful thump you can feel. And when you crave serious gain for the fattest leads and most over-the-top riffs, Overdrive 2 has all you need and more.

Front Panel Features

• Four Independent Channels Each With:
  -- Gain Control
  — Master Control
  — Treble, Middle, Bass
  — Classic/Modern Voicing Switch
• Tube-Driven Reverb
• Master Presence/Density

All four channels feature 3-band EQ, gain, volume, contour knobs and a switch for modern / classic voicing. Master reverb, presence and density controls cover all channels.

Tourmaster Power Grid
 The Tourmaster Power Grid allows you to independently set the wattage on each of the four channels:

• At full power: 25, 50 or 100 watts
• At half power: 10, 25 or 50 Watts

Tourmaster features Egnater’s exclusive Power Grid, which allows you to independently set each channel’s wattage from 10 to 100 watts. With the Power Grid you get the best of both words – great power tube distortion at lower levels and tons of clean headroom on demand. Tube-driven reverb, a channel-assignable, tube-buffered effects loop, speaker simulated line out and simple master bias adjust with test points are just some of the features you’ll find in this feature-packed beast.

Rear Panel Features

• Assignable Tube-Driven Effects Loop:
  — Assign to Channels 1 and 2
  — Assign to Channels 3 and 4
  — Assign to all Four Channels
  — Assign to Pedal Only
  — Send and Return Level Controls
  — Selectable Series or Parallel
• Cabinet Voiced Line/Recording Out
• Simple Master Bias Adjust with Test Points

Think of the Tourmaster as four separate amps in one box. Each channel has an identical set of controls that are simply repeated four times. That is where the similarity ends.

Clean/Vintage 1 is the cleanest of the four. Within this channel lives a range of Classic tones ranging from pristine sparkle with the voicing switch set to MODERN to a punchy, aggressive drive (think clean JTM) in the CLASSIC mode. Pressing the button to activate the CONTOUR control opens an entire new range of beautiful clean, almost acoustic, tones not often found in a tube amplifier.

Clean/Vintage 2 has a very similar voicing to the Clean/Vintage 1 channel. We’ve added more gain so this channel can be “pushed” into mild overdrive. Sweet blues and classic rock tones are easily coaxed out of this channel. The contour knob adds another level of unique flavors.

Overdrive 1: From AC/DC crunch to modern rock, this channel covers a lot of bases all by itself. Dial down the gain and the feel is pure classic rock. Push the gain and enter into more modern, saturated territory. Scoop the mids with the CONTOUR control for monstrous metal or set it for classic British rhythm.

Overdrive 2: The Tourmaster’s most intense channel, you’ll find ferocious gain with a wide range of tones to suit the ‘80s shredder as well as the heaviest modern metal player. Scoop the mids with the powerful CONTOUR control for massive crunch or push the midrange for a solo tone that cuts through with serious authority.

Power Grid: This is a really cool feature your will only find on the Egnater Tourmaster™ amps. Using a group of 5 slide switches on the rear panel, you can set the power output for each channel individually. There is a 3 position slide switch corresponding to each of the four channels and a single FULL POWER/ HALF POWER slide switch. In FULL POWER mode you can choose between 100w, 50w or 25w per channel. In the HALF POWER mode you can between choose 50w, 25w or 10w per channel.

With the Tourmaster you not only have a wide array of tones available from the preamp channels, but with the Power Grid you can introduce any amount of power tube distortion you wish to each channel, all preset and automatic.

Helpful Info about the Manufacturer
Phone:  323-277-4119
Warranty: