American Musical Supply
American Musical Supply
1-800-458-4076
AMS Advantage

Electro Voice ND468 Dynamic Instrument Microphone

Easy Payments, Fastest Shipping, Best Customer Service and Free Extended Warranty on Electro Voice ND468 Dynamic Instrument Microphone. AmericanMusical.com makes it simple to buy gear!

See all items from Electro Voice
Product Description

The Electro Voice ND468 Dynamic Instrument Microphone is part of a generation of N/DYM microphones specifically designed to accurately capture the sound of horns, acoustic and electric guitars, and the percussive energy of drums in both live performance and studio recording. The ND468 is a member of a family of microphones manufactured to enhance sonic smoothness, improve gain-before-feedback, and provide more consistent performance with greater durability than earlier generations of N/DYM microphones.

EV's microphone designers created a smooth, extended response with an open top end to reproduce instrumental sounds with natural acoustic accuracy. The ND468's reduced size and exclusive pivoting yoke gives you maximum mechanical versatility on any instrument. The Electro Voice ND468 is the musician’s choice for a microphone with unsurpassed mechanical flexibility and studio-quality acoustics.

Electro Voice ND468 Dynamic Instrument Mic Features

  • Designed specifically for musical instruments
  • Accurate response, even in high sound pressure level (SPL) applications
  • Flexible mechanical design for optimum positioning
  • Supercardioid pattern for exceptional acoustic isolation and feedback rejection
Characteristic of all N/DYM microphones is the outstanding neodymium-iron-boron magnetic structure. This structure provides greater sensitivity for exceptional signal-to-noise ratio and improved recording quality. Combining the N/DYM magnetic structure with a large, reinforced diaphragm results in a transducer manifesting a warm, open and transparent sound quality normally found in studio-quality microphones. The ND468 also includes a highly effective humbucking coil that reduces hum interference from lighting and other electrical power sources.

N/DYM microphones feature EV's AcoustiDYM shock-mount system. This unique vibration isolating system works as a multistage device. At low frequencies, a rear sound wave cancels the diaphragm motion while, at high frequencies, the specially designed rubber shock mount isolates the transducer from motion. Combined with the windscreen bumper, the shock mount forms an advanced technology, vibration isolating system that dramatically reduces all forms of handling noise for the most demanding situations.

Operation
The ND468's low-frequency response varies with the distance of the sound source to the microphone. This is known as proximity effect. Maximum bass response is produced in close-up use with the microphone 1/4 inch from the sound source. Minimal bass response is experienced at distances greater than 24 inches. By working closer to the microphone, the instrument will sound more robust. The pivoting yoke designed for the Electro Voice ND468 allows this type of versatile microphone placement.

Close miking will also reduce the potential for feedback from a PA sound system.This benefit is in addition to the feedback-reducing supercardioid polar pattern. When close-talked, the substantial bass boost provides an increase in overall microphone output level. The mixer gain may be proportionately reduced, resulting in a reduction of the system’s sensitivity to feedback caused by sound entering the microphone from the loudspeakers.

The dynamic element of the Electro Voice ND468 mic will provide reliable operation in extreme temperature, humidity and other adverse conditions that would render typical condenser microphones useless. These EV ND468 features will provide years of trouble-free operation.

Product Specifications
Electro Voice ND468 Dynamic Instrument Mic Specifications

Frequency Response:
  • Close Response: 30-22,000 Hz
  • Far Response: 60-22,000 Hz
  • Polar Pattern: Supercardioid
  • Sensitivity, Open Circuit Voltage @ 1 kHz: 3.1 mV/pascal
  • Power level @ 1 kHz: -51 dB (0 dB = 1mW/pascal)
  • Dynamic Range: 144 dB
  • Equivalent Output Noise: 14 dB A weighted (0 dB= 0.00002 pascal)
  • Polarity: Positive pressure on diaphragm causes positive voltage on pin 2 ref. pin 3
  • Impedance: 150 ohms balanced (low–Z)
  • Materials, Grill Screen: Memraflex
  • Finish: Nonreflecting black
  • Accessories Included: 311 stand clamp, Soft zippered gig bag
Dimensions:
  • Length: 115 mm (4.5 inches)
  • Diameter: 52 mm (2.05 inches)
  • Shank: 20 mm (0.80 inches)
  • Net Weight: 190 g (6.7 oz)
  • Shipping Weight: 453 g (16 oz)


Helpful Info about the Manufacturer
Phone:  800-392-3497 Warranty:  5 Years Non-Powered Speakers; 3 Years Powered Speakers; 3 Years Electronics; 3 Years Wired Microphones; 2 Years Wireless Microphones
Customer Reviews
Discussions
Currently there are no discussions available for this item.
MSRP: $324.00
Save:54%
$149.00
Please select a Model
Loading....