Event
Event 20/20 BAS Active Nearfield Studio Monitors Package


Model Options:  
Collapse 
Event 20/20 BAS Active Nearfield Studio Monitor

Fifteen years after the original release of the 20/20 Studio monitor, Event brings you a new generation of clarity, transparency and definition with the release of the 20/20BAS. The Event 20/20BAS Active Studio monitor incorporate several fundamental enhancements over the original 20/20 while retaining its powerful performance and character.

Event 2020BAS Studio Monitors Video Demos
Click any of the video links on the left, then click Play to access the Event 2020BAS demos

Event 20/20BAS Active Studio Monitor Features
  • Class AB Amplification; 250 Watts
  • 7.1 inch Low Frequency Driver; 1 inch Silk Dome Tweeter
  • 35Hz-20kHz Frequency Response
  • 2300Hz Crossover Frequency
  • Balanced XLR and Unbalanced RCA Inputs
  • Ferrite Magnet In Low and High Frequency Driver
  • Front Port Low Frequency Vents
The original transducer design and cabinet volume have been maintained, however the high and low frequency amplifiers, cabinet bracing and overall construction have been revolutionised to improve audio characteristics, increase dynamics and extend reliability.

Opal Technology
Event's engineering team used ideas and technologies from its flagship Opal speaker in the 20/20BAS Active Speakers in order to achieve performance in keeping with the company design philosophy of high output, low distortion and excellent dynamics.

We were very respectful to the original 20/20 speaker… Everyone in Event's
design department has great respect for the speaker, but we saw a few areas
where we could use technologies developed for Opal to get even better dynamics
with lower distortion. The new low frequency amp can deliver up to 250w of peak
power into the woofer. This gives you the BOOM... the definition in the bottom end
that you're looking for."
- Marcelo Vercelli (Event Director of Engineering)

Fully discrete Class AB amplifiers for the tweeter and woofer provide up to 250 watts of burst power to the 20/20BAS Active monitor with less than .01% Total Harmonic Distortion (THD). This more than doubles the power provided by the original 20/20BAS amplifier design with less than half the distortion. Sustained high output performance is ensured through a new oversized toroidal power supply that can ensure sustained extreme low frequency reproduction.

Hindsight is 20/20!
First released in 1995, the original Event 20/20 nearfield studio monitor was universally acclaimed and launched the Event brand worldwide. Using manufacturing processes and materials unheard of at the time, the 20/20 combined a magnetically shielded 25mm natural silk dome with an 8 inch mineral-impregnated polypropylene cone. A laminated and internally dampened MDF cabinet with a front-mounted large diameter bass port assisted in providing the 20/20's impressive low end response. The Event 20/20BAS adds even more to this tried and true design.
Collapse 
Event 20/20 BAS Active Nearfield Studio Monitor Specifications

System
  • Frequency Response: 35Hz-20kHz +/-2dB
  • Crossover Frequency: 2300Hz
  • 3rd Harmonic Distortion: @ 90dB SPL, 1m
    • 500-7kHz: 0.08%
    • 200-20kHz: 0.2%
    • <200Hz: 1.5%
  • Acoustic Output: SPL @ 1m
    • Long term (80Hz-20kHz): 105dB
    • Peak (80Hz-20kHz): 108dB
  • Signal Input: XLR, RCA (balanced/unbalanced)
Low Frequency Transducer
  • Piston Diameter: 7.1 inches (180mm)
  • Voice Coil Configuration: High temperature single coil
  • Voice Coil Diameter: 1.5 inches (38mm)
  • Former Material: High-strength Polyamide - Glass Fiber
  • Magnet Type: Ferrite
  • Cone Type: Mineral Filled Polypropylene
  • Magnetic Shielding: Bucking magnet and steel cap
High Frequency Transducer
  • Dome Diameter: 1 inch (25.4mm)
  • Voice Coil Diameter: 25mm (0.98 inches)
  • Magnet Type: Ferrite
  • Dome Type: Silk
  • Gap Design: Ferrofluid Cooled
  • Magnetic Shielding: Bucking Magnet
Amplifier - Low/high frequency
  • Frequency Response: 20Hz-20kHz(+/-0.2dB)
  • LF Trim: Constantly variable +/-3dB
  • HF Trim: Constantly variable +/-3dB
  • Subsonic Filter: -3dB @ 30Hz
  • Driver Protection: Current Limiting
  • Temperature Protection: Thermal Cut-Off Switch
  • Indicators: Event badge On mode
  • Power Requirements: Voltage selector 110-120V or 220-240V, 50/60Hz, 180VA
    • Power via detachable 3 circuit IEC type linecord
Physical
  • Cabinet Construction: MDF
  • Low Frequency Vents: Front Port
  • Dimensions (WxHxD): 10.2 x 14.8 x 11.8 inches (260 x 375 x 300 mm)
  • Weight: 37.48 lbs (17kg)
Recommended Accessories for:
http://www.americanmusical.com/Item--i-Hosa-Cable-CRA204-Dual-RCA-To-Dual-RCA-Cable
Hosa Cable CRA204 Dual RCA To Dual RCA Cable  13 Foot
ex VAT   inc VAT  


http://www.americanmusical.com/Item--i-CBI-American-Made-Guitar-Instrument-Cable
CBI American Made Guitar Instrument Cable  15 Foot
ex VAT   inc VAT  


http://www.americanmusical.com/Item--i-Auralex-MoPADs-Monitor-Isolation-Pads
Auralex MoPADs Monitor Isolation Pads  2 Pair
ex VAT   inc VAT  


http://www.americanmusical.com/Item--i-On-Stage-SMS6000-Studio-Monitor-Stands-Pair
On Stage SMS6000 Studio Monitor Stands Pair 
ex VAT   inc VAT  


http://www.americanmusical.com/Item--i-SE-Electronics-Project-Studio-Reflexion-Filter

SE Electronics Project Studio Reflexion Filter 
ex VAT   inc VAT  


http://www.americanmusical.com/Item--i-Focusrite-Saffire-Pro-24-DSP-Firewire-Audio-Interface

Focusrite Saffire Pro 24 DSP Firewire Audio Interface 
ex VAT   inc VAT  

 - 

Collapse 

 
 

 

 
 
FREE 12 month Extended WarrantyFree ShippingBuy it on EZ Payments!


Price Match - Guarantee
 

 

 
 
FREE 12 month Extended WarrantyFree ShippingBuy it on EZ Payments!


Price Match - Guarantee
 

 

 
 
Open Box Item Non Factory SealedFree ShippingItem Can Ship To Canada


 

 

 
 
Dent and ScratchFree ShippingItem Can Ship To Canada


Quantity:
Add to Cart
Add to Wish List  
 

 
Customer Review
Rate and Review this Product:  
23 people rated this item
Loading....