American Musical Supply
American Musical Supply
1-800-458-4076
AMS Advantage
American Musical Supply Promo Extended Warranty EzPay EzPay

Event 2030 3-Way Powered Studio Monitors

Easy Payments, Fastest Shipping, Best Customer Service and Free Extended Warranty on Event 2030 3-Way Powered Studio Monitors. AmericanMusical.com makes it simple to buy gear!
  • //www.americanmusical.com/ItemImages/Large/EVE 2030.jpg Product Image

See all items from Event
Product Description

The Event 2030 3 Way Powered Studio Monitor combines three discrete drivers to allow for incredibly accurate reproduction of the entire audio spectrum. The Event 2030 combines precisely engineered acoustic design, signal processing and amplifier technology to provide an incredibly detailed and wide soundstage with a bass response that far exceeds what most would expect from a box this size.

Event took the three-way concept to a new level, resulting in a class-defining speaker system with compelling audio performance and a physical embodiment that makes it ideal for use in near field applications. A new wave guide assembly was designed to house the speaker’s mid-range and high frequency drivers as well as optimize audio dispersion and power response characteristics.

For the critical mid-range application a 3.5 inch cone transducer was engineered using a pressed pulp and polypropylene cone, combined with an optimized magnetic circuit. The driver is loaded onto a shallow wave guide that results in increased sensitivity and output while generating very low distortion artifacts, giving the Event 2030 3 Way speaker system an incredibly defined, upfront vocal character.

Combined with an aluminum alloy dome tweeter, the mid-high wave guide assembly employs an optimized set of electronic acoustic filters, derived from Event’s flagship Opal studio monitor, to maximize phase, time correction and frequency response characteristics.

The resulting signal processing achieves controlled audio reproduction and smooth frequency response performance extending well above 20 kHz.

A key design feature of the Event 2030 amplifier is use of a proprietary, soft clipping power amplifier design topology that never allows the amplifier’s output waveform to become jagged or harsh. This results in a speaker system whose character stays consistent no matter what the output level, as audible distortion artifacts are kept under control.

Product Specifications
Event 2030 3 Way Powered Studio Monitor Specifications:

  • System:
    • Type: Three-way, bass reflex
    • Frequency Response: 38Hz - 22kHz
    • Crossover Frequencies: 400Hz and 3kHz
    • Crossover Type: Linkwitz-Riley Acoustic -Fourth order for Low/Mid range Event Proprietary Acoustic -Second order for Mid/High range
    • Low Frequency Filter: Butterworth Subsonic Second Order (-3dB at 38Hz)
    • Acoustic Output - SPL at 1m, Long term (80Hz - 20kHz): 111dB
    • Acoustic Output - SPL at 1m, Peak (80Hz - 20kHz): 114dB
    • Signal Input: XLR (balanced)
    • AC Input Connector: 3-Pin IEC
    • Average Long Term Power Consumption: 95 watts
    • Quiescent Power Consumption: <10 watts
    • Overdrive Protection: Event proprietary IC based fast limiting with sliding gain
    • Thermal Protection: Thermal cutoff switch, auto reset
  • Low frequency transducer:
    • Piston Diameter: 7.1 inches
    • Voice Coil Diameter: 1.5 inches
    • Former Material: Kapton
    • Voice Coil Wire: Copper
    • Magnet Type: Ferrite (fully shielded)
    • Cone Type: Mineral Filled Polypropylene
    • Mid Range Transducer:
    • Piston Diameter: 3.3 inches
    • Voice Coil Diameter: 1 inch
    • Former Material: Glass fiber
    • Voice Coil Wire: Copper
    • Magnet Type: Ferrite
    • Cone Type: Pressed pulp/Mineral filled polypropylene
    • High Frequency Transducer:
    • Piston Diameter: 0.75 inch
    • Voice Coil Diameter: 0.75 inch
    • Magnet Type: Neodymium (fully shielded)
    • Cone Type: Aluminum alloy with Ferrofluid cooled magnetic gap
  • Low Frequency Amplifier:
    • Frequency Response: 20Hz - 40kHz (+/- 0.25dB) bandwidth limited
    • Operating Band Pass: 20Hz - 400Hz
    • Total Harmonic Distortion: 0.02% at 120 watts into 4 ohm load
    • Long Term Power at 4 Ohms: 80 watts
    • Power at 4 Ohms: 120 watts
    • Output Topology: Class AB with proprietary soft clipping topology
    • Cooling: Convection - Aluminium heat sink
  • High Frequency Amplifier:
    • Frequency Response: 20Hz - 40kHz (+/- 0.25dB) (bandwidth limited)
    • Operating Band Pass: 400Hz - 30kHz
    • Total Harmonic Distortion: 0.02% at 120 watts into 4 ohm load
    • Long Term Power at 6 Ohms: 80 watts
    • Power at 6 Ohms: 120 watts
    • Output Topology: Class AB with proprietary soft clipping technology
    • Cooling: Convection - Aluminium heat sink
  • Physical:
    • Cabinet Construction: Engineered Composite Wood
    • Low Frequency Vent: High ‘Q’ / High output rear fi ring port
    • Cabinet Volume: 16 Litres
    • Cabinet Dimensions (W x H x D): 10.8 x 11.8 x 10.2 inches
    • Cabinet Weight: 32 lbs.
    • Operating Temperature Range: 40-95 deg F
  • Power Supply:
    • Type: Torodial
    • Rating: 270VA
    • AC mains fuse and AC voltage selector: 100V-120V 5 Amp, 220V-250V 2.5 Amp
Helpful Info about the Manufacturer
Phone:  805-566-7777 Warranty:  1 Year
Customer Reviews
Discussions
Currently there are no discussions available for this item.
5
0   Review (s) - 8   Rating (s)
0% Interest - EZ Payments!

5 Payments of
$239.80
MSRP: $1,399.00Save:14%
$1,199.00
Ground Delivery - often at your door in 2 days
Please select a Model
Loading....