Fender Volume Tone PedalThe Fender Volume Tone Pedal gives you masterful control over both volume and tone.
Tilt this pedal back and forth to contol the volume of your signal and swivel it left to right to control the subtleties of your tone.
Fender Volume Tone Pedal Features
- Tuner Output - Connect to your tuner, if desired. The Volume Control does not affect this output, but the Tone Control does affect it.
- Input jack - Plug your guitar (or other audio source) in here.
- Output jack - Connect to the input of your amplifier (or other audio device).
Note: This pedal uses a passive Tone control circuit and works best when connected directly to a passive guitar. If you must use an active guitar or put other pedal before this one, the output impedance of the active device should be 10kOhm minimum for the best performance.
Fender Volume Tone Pedal Specifications
- Input Impedance: 150kOhm (250kOhm Volume Pot)
- Output impedance: 0 to 62kOhm, (Varies with Pedal Position)
Recommended Accessories for: