|  | | Fishman |
 
Fishman Loudbox Performer Acoustic Guitar AmplifierThe Fishman Loudbox Performer is a new, 130-Watt addition to the powerhouse family of Loudbox amplifiers.
With all the features a gigging performer demands, this 2-channel amplifier is lightweight, compact and ultra-flexible. Three bands of EQ with feedback-fighting controls give you incredible control over your tone.
The Loudbox Performer, like the rest of the Loudbox line, implements an unprecedented triamplified design using select speaker components to give you the most natural reproduction of your instrument. Three amps and high-quality drivers mean you sound clean and clean, but you get heard like never before.
Fishman Loudbox Performer Features
130 Watts RMS, cumulative, tri-amped power with active crossover
- 2x6.5-inch Woofer: 80W amplifier
- 4-inch Cone Midrange: 40W amplifier
- 1-inch Neodymium Soft-Dome Tweeters: 10W amplifier
- SPL @ 1 Meter: 117dB SPL
Channel 1 - Dedicated Instrument Channel
- Input Gain with 10dB Pad & Clip Indicator
- Shelving Bass and Treble
- Resonant-style Midrange
- Effects Level
- Notch Filter (feedback control)
- Phase Switch (feedback control)
- Dedicated Effects Loop
- 1/4-inch Input
Channel 2 - Instrument or Microphone Channel
- 48V Phantom Power
- Input Gain with 10dB Pad & Clip indicator
- Shelving Bass and Treble
- Resonant-style Midrange
- Effects Level
- Notch Filter (feedback control)
- Phase Switch (feedback control)
- Dedicated Effects Loop
- 1/4-inch Input & Balanced XLR Input
Auxiliary Stereo Input with Level Control
Digital Effects
- Hall 1&2
- Plate 1&2
- Chorus
- Master Level
D.I. Output
- Balanced XLR for Channel 1, 2, and Main Mix
Tuner Output
Mute
- Mutes Channel 1 and 2
Footswitch
- Remote Mute Control
Kickstand
- Adjusts baffle from 10 to 45 degrees
Dimensions
- 19.2 x 15.5 x 11.2 inches
- Weight: 35 lbs (15.9kg)
Fishman Loudbox Performer Specifications
Rated Power
- Cumulative: 130 Wrms
- Woofer Amp: 80Wrms continuous
- Midrange Amp: 40Wrms continuous
- Tweeter Amp: 10Wrms continuous
- All measurements @ nominal line 120V, 60Hz
Acoustic Response
- SPL @ 1 Meter: 117dB SPL
- Frequency Response: 80Hz – 20kHz ± 4dB
Power Consumption
- 200W max
Input Impedance
- Channel 1: 10M Ohm
- Channel 2: 1/4-inch Jack (tip) 10M Ohm
- Channel 2: 1/4-inch Jack (ring) 10M Ohm, 10k Ohm with 15V phantom power
- Channel 2: XLR Input 2.4k Ohm Balanced
- Aux Input (stereo): 10k Ohm
Nominal Input Level
- Channel 1: -20dBV/-10dBV with 10dB pad
- Channel 2: 1/4-inch Jack (tip) -20dBV/-10dBV with 10dB pad
- Channel 2: 1/4-inch Jack (ring) -20dBV/-10dBV with 10dB pad
- Channel 2: XLR Input -40dBV/-30dBV with 10dB pad
- Aux Input (stereo): -10dBV
Maximum Recommended Input Level
- Channel 1: 6dBV
- Channel 2: 1/4-inch Jack (tip) 6dBV
- Channel 2: 1/4-invh Jack (ring) 6dBV
- Channel 2: XLR Input -14dBV
- Aux Input (stereo): 6dBV
Phantom Power (Channel 2 Only)
- XLR Input: 48Vdc/6.8k Ohm dc Source Impedance per pin
- 1/4: Jack (ring) 15Vdc/10k Ohm dc source impedance
Tone Controls and Anti-Feedback (Channel 1 and Channel 2)
- Low: ± 10dB @ 100Hz (shelving)
- Mid: ± 12dB @ 1.2kHz (resonant)
- High: ± 12dB @ 10kHz (shelving)
- Anti-Feedback Range: -14dB @ 20– 400Hz (Hi – Q resonant)
Digital Effects
- Program 1: Hall 1
- Program 2: Hall 2
- Program 3: Chorus
- Program 4: Plate 1
- Program 5: Plate 2
Channel 1 & 2 D.I. Out
- Output Impedance: 600 Ohm balanced
- Phantom power tolerant, ground isolated
Channel 1 & 2 Effects Sends
- Output Impedance 2.2k Ohm
- Output Voltage +3dBV (1.4Vrms max)
-10dBV Nominal
Channel 1 & 2 Effects Returns
- Input Impedance: 20k Ohm
- Input Voltage: +3dBV (1.4Vrms max)
-10dBV Nominal
Sends and returns are compatible with battery operated effects processors
Mix D.I. Out
- Output Impedance: 600 Ohm balanced
- Phantom power tolerant, ground isolated
Tuner Out
- Output Impedance: 5k Ohm
Speaker System
- Woofer: 6.5-inch paper cone
- Midrange: 4.5-inch polypropylene cone
- Tweeter: 1-inch soft dome, rare earth magnet, ferrofluid cooled
- Crossover: 600Hz, 4kHz (Tri-amplified with active crossover)
- Woofer and midrange installed in separate isolated and damped compartments
Baffle Angle
- Upright Position: 10 degrees
- With Kickstand: 45 degrees
Physical
- Dimensions 19.5 x 16 x 11.5 inches (49.5cm x 40.5cm x 29cm)
- Weight: 35 lbs. (16 kg)
Because Fishman continually improves their products, they reserve the right to change any of the above specifications and information without notice.
|
| Price Match Plus
| |
|
Rate and Review this Product:
 8 people rated this item  | Michael G from Grass Valley, CA | | LodeLineMusic49@suddenlink.net | | Overall Ranking: | | Price:
|      | | Overall:
|      | | Sound:
|      | | Reliability:
|      | | Action:
|      | | Finish:
|      | | Playability:
|      | | Tone:
|      | | Quality:
|      | | Subject: | This is truley a PRO acoustic guitar amp | | Quality:
| I would consider this the "Twin Reverb" of acoustic guitar amps. It looks and sounds excellent. | | Sound:
| The tone is top notch. You can dial in any tone your little heart desires in a few seconds. I run a songwriter's showcase and some open mic events. So lots of guitarists have plugged in to this amp. They have all been impressed with the sound so far. It is easy to use. I am very happy with AMS and my purchase of this amp. | | Reliability:
| So far it has worked perfectly without a hint of trouble. | | Overall:
| WOW! This amp sounds excellent, is the perfect size and weight and is very versatile. | | Playability and Feel:
| It does not have a neck either. | | Tone:
| Again it is and amp. The tone varieties are perfect for any acoustic guitar, steel string or nylon. It doubles as a PA for small venues as you can plug a a mic or mixer straight into the XLR input and your guitar into the other channel and go. | | Finish:
| The covering is very sturdy and it is built well. | | Action:
| It's an amp. It does not have "action". | | Skill Level:
| Pro-Rock Star | | Do you own this product?:
| Yes | | Date submitted:
| 09/25/2009 | |
| | dusty on the island from Holualoa, Hi USA | | Overall Ranking: | | Features:
|      | | Sound:
|      | | Quality:
|      | | Subject: | Love this amp! | | Quality:
| Appears to be very well built, very solid, but very portable, too. Everything works just as advertised. Use mine as a p.a. system for soloing. | | Features:
| It has almost anything you could ask for except separate effects for the individual channels (a nice reverb for vocals and chorus for guitar, for instance). Also wish a cover was available. Everything else is aces! | | Sound:
| I have a '71 Ovation balladeer with an ancient bone nut and an after-market Fishman pick-up. Lesser set-ups seem to only amplify that "synthetic Ovation sound." I can easily dial that out with this amp and get plenty of beautiful tone. Vocals sound great, too! Lots of headroom! | | Reliability:
| Has never let me down. I used it as an individual monitor and ran a line to the board at a larger venue. Worked beautifully! | | Overall:
| I shopped around before I bought mine and I love it more every time I play through it. Great for home, solo gigs, as an acoustic guitar monitor on big stages. | | Value:
| You get what you pay for, and this is a great amp! | |
| | McShwee from Parlin, NJ, USA | | Overall Ranking: | | Features:
|      | | Sound:
|      | | Ease of Use:
|      | | Quality:
|      | | Subject: | Loudbox is a Natural | | Quality:
| Extremely well thought-out and constructed | | Features:
| The amp sounds great set flat! The feedback notch has just the right amount of cut, so it doesn't destroy your tone. The kickstand sets it at a great angle for monitoring. Reverbs are very nice and subtle | | Ease of Use:
| It couldn't be easier to use. I didn't need the manual. | | Sound:
| The tone is very natural without sounding flat and lifeless. No silly boosts to compensate for poor circuit design |
|
|
|
|
|
|