Hartke Kickback 15 Bass Guitar Combo AmplifierThe Hartke Kickback 15 was designed to be tilted back on stage, pointed up at you, so you get a full signal, right where you need it!
It has an XLR direct out that you run to the board, so they can hear your bass out front (pre volume & EQ). It's loaded with the extremely cool Hartke 15-inch aluminum cone driver and Hartke's model 1200 head (120 watts into 8 ohms). Other features include 3-band EQ plus an adjustable-frequency shape control and a headphone jack.
Hartke Kickback 15 Features & Specs
- Revolutionary Two-Way (Upright & Tilt-Back) Cabinet Design For Performance, Practice And Monitoring
- Custom Hartke 15 inch Aluminum-Cone Driver
- 120 Watts @ 8 Ohms
- Unique Shape Control For Accurate Tone-Shaping
- 3-Band EQ
- Passive/Active Input Jack
- Balanced XLR Out
- Dimensions: 21.75 (H) X 18 (W) X 16.75 inches (D)
- Weight: 47 pounds
Flexible enough to be played upright or
kicked back as a monitor, Hartke's Kickback quickly became one of the most imitated (but never duplicated) designs in bass. The 15 is the
big bottom Kickback combo. Its Versatile
two-way design delivers all the bass you'll ever need. Features include a massive Hartke 15 inch aluminum-cone driver, 120 watts (at 8 ohms), and a fully adjustable Shape control.
The XL Series provides the highest performance at every level. Each cabinet is carefully calibrated and tuned to give you a smooth, balanced response along with an articulate, high-impact attack. Equipped with custom Hartke XL aluminum-cone drivers for maximum response, the XL Series also features high-quality 3/4 inch + 5/8 inch composite plywood construction and a shockproof metal grille. These high-quality cabinets come equipped with a rugged, road-tough covering, interlocking stacking corners and recessed input jacks to safeguard critical cable connections.
Covered by Hartke's 3 year Warranty.
Hartke Kickback 15 Specifications
- Rated Output Power (@ 1 kHz, 8 ohm):
- Normal: 135 W
- Limit: 120 W
- Rated Input Level (@ 1 kHz):
- Normal: -30.1 dBu
- Limit: -30 dBu
- Total Harmonic Distortion (@ 120 W, with 30 kHz LPF):
- Signal To Noise Ratio (with 30 kHz LPF):
- Normal: 85 dB
- Limit: 80 dB
- Frequency Response (EQ flat, +0.5/-3 dB):
- Pre Output: 5 Hz - 60 kHz
- Speaker Output: 35 Hz - 52 kHz
- Maximum Gain:
- Input to Pre Output: 45.05 dB
- Input to Speaker Output: 62.1 dB
- Equalizer:
- Low (100 Hz): ±15 dB
- Mid (300 Hz): ±15 dB
- High (5 kHz): ±15 dB
- Shape Effect (Shape control, Min. to Max.):
- Normal: 22 - 23 dB
- Limit: > 20 dB
- Noise Level (@ Speaker Output with 30 kHz LPF, EQ flat):
- Volume Level Minimum: - 60 dBu
- Volume Level Maximum: - 44.5 dBu
- Headphone Level (600 ohm load)
- Normal: 493 mW
- Limit: 500 ±30 mW
- Idle Current Measurement:
- Normal: 4.4 mV / 0.47 Ohms
- Limit: Max. 10 mV / 0.47 Ohms
- DC Offset Voltage:
