Haz Labs Mutron III Plus Envelope Filter Pedal
The Original MU-TRON III Plus Envelope Filter Pedal translates the envelope or volume profile of every musical passage into an easily-controlled, vowel-like sound, as you play.
Use MU-TRON III Plus to create a variety of synthesizer sounds with most electrified instruments: guitar, bass, keyboards, drums, flute, saxophone, brasses... even microphone. The sharper your attack and the more percussive your instrument, the wilder your sound will be. Besides providing that inverted snap (perfect for funky bass), MU-TRON III Plus also functions as an automatic wah pedal. Full instructions are included, but you decide how far you want to go.
Powered by 9V battery or optional #HAZPS1A adapter.
Mutron III Plus Envelope Filter Pedal Specifications
Connections
- Input: 1/4 inch gold-plated phone jack
- Output: 1/4 inch gold-plated phone jack
- DC Power: Jack for HAZ Model PS-1 power supply
Controls
- Power: On-Off switch
- Low Battery/Sweep Limit Indicator: Monitors the condition of the Batteries and aids in setting the depth control
- Range Switch: Emphasizes high or low frequencies
- Drive Switch: Shifts the filter up or down for two totally different effects
- Mode Switch: High-pass, band-pass, low-pass or notch filter characteristics, for accentuating different regions of audio band, allowing four distinct tonal images
- Depth Control: A sensitivity control for optimum operation from any musical source
- Peak Control: For varying filter sharpness from a subtle accentuation through a distinct vowel sound to high resolution filtering that plays individual overtones
- Bypass Footswitch: A true passive bypass switch for routing the audio signal around the effect
- Dip Switches (internal): Permit you to customize your MU-TRON III Plus to highlight your instrument and playing style. Two switches tailor the high and low frequency ranges. Three switches control the way the MU-TRON III Plus follows the dynamics of your instrument. The last switch allows the Low battery L.E.D. to double as a sweep limit indicator
Technical
- Input Impedence: Greater than 60K ohms (20 - 20 kHz).
- Output Impedence: Less than 2.6K ohms (20 - 20 kHz).
- Maximum Undistorted Output Signal: 10V peak-to-peak.
- Power Supply: 2 9-Volt batteries (not included) and/or optional power supply (HAZ Model PS-1, for operation from 120 VAC 60 Hz)
- Weight: 3.25 lbs without batteries
- Dimensions: (L x W x H) 9 x 5 x 3.125 inches
- Components: Gold-plated stereo 1/4 inch jacks, 1% metal-film resistors, state of the art surface mount technology for highest reliability
- Construction: Heavy-gage steel bottom with baked-on industrial enamel finish. Heavy-gage aluminum front panel
- Quality Control: Each unit is calibrated, 100% tested, and played
- MADE IN THE USA
Optional
- Power Supply: HAZ Model PS-1 (120 VAC 60 Hz input)
Recommended Accessories for: