IK Multimedia Amplitube Fender Studio Guitar Modeling SoftwareClassic Fender tone and everything you need to practice, play and record with your computer!
AmpliTube Fender Studio is the first and only official guitar and bass Amp and FX software suite made by IK Multimedia in cooperation with legendary music icon Fender Musical Instruments Corporation. With a collection of pieces of gear collected from the most sought after classic and modern Fender amps (including the '65 Twin Reverb, Super-Sonic, Metalhead and TBP1 Bass Preamp), cabinets, stomp boxes and rack effects, AmpliTube Fender Studio sets a new standard for software amplifiers.
From guitar to bass, from Country to Blues and Rock, Punk to Metal, whatever style you play, AmpliTube Fender Studio provides you all the tools you need to practice, play, and record with classic Fender tone on your computer. Amplitube Fender Studio comes in a convenient bundle package including all the necessary hardware and software:
- StealthPlug, a simple plug-n-play Guitar-to-USB audio interface cable
- AmpliTube Fender LE Amp and FX modeling software
- Riffworks T4 recording software
- AmpliTube X-GEAR, expandable guitar/bass amp and FX modeling system
What’s new in AmpliTube Fender
All-stage-design in the modeling of both amps and effects. No compromises have
been made for developing the Fender models included in AmpliTube Fender. Every stage of
each of the included amps and effects has been modeled separately, leaving no room to
approximation to achieve a truly hyper-realistic sound. Proprietary technology like
IK’s DSM (Dynamic Saturation Modeling) has been pushed to the limit to raise the
standard once again in recreating the included models.

4 Amplifiers
65 Twin Reverb
Super Sonic
MH500 Metalhead
TBP1 Bass Preamp
|
Ultra-precise amp response down to the finest detail. The amps have been
painstakingly studied, analyzed and reproduced with a maniacal attention to the very
deepest detail: from the true potentiometers curves to the characteristic amp behavior
at all sound levels. Having the sound of the real things on your desktop doesn’t get
any closer than this.
Precisely matched reverb models. Each amp sports its unique on-board reverb
model that has been modeled separately in order to closely mirror how the original
corresponding amp sounds.
New rotary speaker technology: VRM. To accurately emulate the Fender Vibratone
we have been challenged to develop a unique new technology we dubbed VRM (Volumetric
Response Modeling) that for the first time is able to physically emulate the real sound
of a rotary speaker as it has never done before in software.

5 Cabinets
65 Twin Reverb 2x12 Open Back
Super Sonic 1x12 Open Back
MH412SL 4x12 Closed Back
Vibratone 1x10 Rotary Speaker
810 PRO 8x10 Front Ported
|
Now easier to set up. AmpliTube Fender sports also a new registration system
that requires the user simply to insert the serial number to authorize the product with
the underlying challenge/response protection system being processed transparently and
automatically in the background. This way you will be up and running in seconds.
Tailored to Fender guitar and bass. During all testing we have ensured that
AmpliTube Fender gives you the best tone when used with Fender guitars and basses so
its default response works perfectly out of the box when used with models like
Stratocaster, Telecaster, Precision Bass, etc...
IK Multimedia AmpliTube Fender Features
- Standalone and plug-in software for all platforms
- 4 of the most influential guitar amps of all time
- 5 original matching cabinets and 2 microphones
- 2 signature classic stomp effects and 2 rack effects
- Incredible tonal flexibility: mix and match amps, cabinets, mics and more
- Sound-certified and approved by the tone gurus at Fender
- 5 separate modules: Tuner, configurable Stomp pedal board, Amp head, Cabinet+Mic
and Rack Effects
- 2 fully configurable rigs with up to 32 simultaneous effects
- Digital Tuner
- Standalone and VST/AU/RTAS plug-in
- Includes SpeedTrainer and RiffWorks T4 Recording Software
- Can be expanded with any Powered by AmpliTube models using AmpliTube X-GEAR
- Can be controlled live with StompIO, StealthPedal and any traditional MIDI
controller
- Hundreds of presets included with more that can be downloaded online
- Powered by AmpliTube with exclusive DSM (Dynamic Saturation Modeling) and VRM
(Volumetric Response Modeling)
  | 2 Fender Stomp Effects
Fuzz Wah
A combination of a Fuzz-style distortion effect and a Wah pedal, this is two pedals in
one. Due to this combination, and its Fuzz>Wah / Wah>Fuzz selector switch, the Fender
Fuzz Wah is capable of effects not easily achieved by traditional units.
Volume
A classic volume control. Use to control the volume of your guitar signal, or in
conjunction with an overdrive/distortion pedal for dynamic control of your signal
boost.
|
In the development of AmpliTube Fender, IK Multimedia has taken an unprecedented
approach to raise the bar of modeling accuracy in order to nail every sonic nuance of
the included legendary Fender gear. Every step in the development process has been
constantly supervised and sound-certified, step-by-step, by the tone gurus at Fender to
ensure that the same quality process of real gear tone-testing has been strictly
followed in the realization of AmpliTube Fender.

2 Fender Rack Effects
Tape Echo
Based on Fender CyberTwin SE Tape Echo
The warmth and wobble of magnetic tape lent a wonderful ambience to the echo effects
used on recordings of the last 50 years, and those sounds can be recreated easily with
Amplitube® Fender®. The Tape Echo’s controls can also be manipulated for experimental
lo-fi echo effects, bringing extra creativity to your playing.
Triangle Chorus
Based on Fender CyberTwin SE Triangle Chorus
A chorus/doubling effect for thickening up your guitar’s tone. The Triangle waveform is
especially effective with overdriven tones.
|
Intuitive interface - Enhanced DSP engine
AmpliTube Fender interface presents a complete replica of included amps, effects and
related controls that is immediately familiar to any guitarist. Every parameter
adjustment is never more than 2 clicks away, making even the most complex guitar tone
fast to set-up and edit.
The interface is supported by leading DSP modeling, which improves upon the already
award winning sound of AmpliTube 2 to set a new standard of realism. AmpliTube Fender
uses new ultra-accurate modeling technologies developed by IK engineers with years of
research in circuitry modeling: in addition to IK’s classic DSM or
Dynamic-Saturation Modeling the new VRM (Volumetric Response Modeling)
technology has been developed to nail down even the finest sonic detail.
5 separate modules on 2 separate guitar rigs
Like AmpliTube 2, AmpliTube Fender includes 5 individual components, with Tuner, Stomp
pedal board, Amp Head, Cabinet + Mic, and Rack effects on 2 separate guitar rigs with 8
different series/parallel configurations. Up to 12 simultaneous stomp-boxes, 2 Amp
Heads, 2 Cabinets with 2 Mics and 8 Rack effects can be configured and used
simultaneously.
The massive number of resulting combinations allows for flexibility that’s a dream for
any guitar player: two separate paths, each with a complete setup to be played
simultaneously, or the incredible power to be able to double the available stomps amps
cabinets and racks effects in one monstrous rig.
Two Microphone Models
 | Amplitube Fender has you covered to get the best sound out of your
recordings.
Groove Tubes MD1b-FET
Dynamic 57
|
Standalone version with SpeedTrainer
The standalone version of AmpliTube Fender sports the same features of the plug-in plus
includes SpeedTrainer: an integrated audio player that gives you separate pitch and
speed controls for learning any of your favorite riffs by slowing tempos of guitar
solos without changing the pitch. SpeedTrainer allows you to drag any WAV or MP3 from
your hard disk (even iTunes files!) and set loop points easily for playing over and
tracking your songs. An included metronome (set by BPM or Tap) is also very useful for
the studying and practicing guitarist.
AmpliTube X-GEAR and StompIO seamless integration
AmpliTube Fender also includes AmpliTube X-GEAR so it can be integrated with all
current and future
Powered by AmpliTube products within a single interface.
X-GEAR provides full mixing and matching of over 200 award-winning gear models, and
adds full MIDI and StompIO control for live usage. When used with AmpliTube X-GEAR, all
the models from AmpliTube Fender can be read together with AmpliTube 2, AmpliTube Jimi
Hendrix, AmpliTube Metal and Ampeg SVX, to build the ultimate mega-rig of award-winning
gear models and truly custom guitar and bass tones.
By utilizing AmpliTube X-GEAR, AmpliTube Fender can instantly be controlled live via
StompIO or StealthPedal for the ultimate tone rig, with no special set-up. StompIO
turns your computer into the most advanced, high-end floor multi-FX system, with 10
floor-board switches, 6 knobs, 2 large displays and up to 6 external
switches/expression pedals, and no need to connect a monitor, mouse or keyboard.