|
|  | | JBL |
Model Options:
JBL Control 25AV Indoor Outdoor SpeakersJBL Control 25AV Speakers are built for indoor or outdoor use!
Complete with InvisiBall wall-mount, The Control 25AV speakers are built tough to allow for indoor or outdoor installation. Utilizing a deep cabinet, high power components and complex circuitry, the Control 25AV's offer some of the smoothest, high-fidelity, performances you can get from a compact 2-way loudspeaker. Designed to cover an area evenly, these compact speakers boast incredible sound quality across a broad listening area.
Shielded to allow use in close proximity to video monitors, the Control 25AV boasts a high-quality transformer that offers reduced saturation and allows use on either
70 volt or 100 volt distributed speaker lines. When switched to the bypass position, its high 8 ohm impedance provides connection between multiple speakers on the same line.
JBL Control 25AV Features
- Video shielded for use near video monitors
- Extremely smooth frequency response
- Stainless steel grill for harsh environments
- 60 W transformer for 70 V or 100 V lines, with 8 ohms thru
- SonicGuard overload protection
- 5.25 inch (130 mm) polypropylene coated woofer
- .75 inch (10 mm) titanium coated horn-loaded tweeter
- InvisiBall mounting hardware and sealed input panel cover included
- Screw-down input terminals
- 100 x 100 degree, high frequency horn
Wall-mounting the Control 25AVs are a breeze thanks to the included InvisiBall wall-mount that allows easy adjustment of the speakers, after mounted, thanks in part to the ball-pivot that proves to be an aid in deterring theft.
Extreme weather resistance aided by a tough stainless steel grille, the JBL Control 25AV's have a paintable surface to allow you to match them up to your decor. The woofer is coated in polypropylene and the circumference is terminated in JBL’s WeatherEdge, a seamless, butyl rubber extension of the woofer surround, protecting it from varying degrees of weather. Reinforced with a thin film of titanium, the polycarbonate tweeter diaphragm is built for rigidity and endurance. Rust-resistant Nickel/zinc terminals provide a secure conection while JBL’s exclusive SonicGuard overload protection ensures reliability while providing full fidelity sound.
Versatility, with the ability to be used as a full range or for low frequencies, the Control 25AV is a perfect match for JBL's Control Contractor subwoofer models.
JBL Control 25AV Compact Speaker Specifications
General
- Frequency Range: 70 Hz - 23 kHz (-10 dB)
- Midrange:: 130 Hz - 14 kHz (±1.5 dB, typical)
- 100 Hr Power Capacity:
- 200 Watts Continuous Program Power
- 100 Watts Continuous Pink Noise
- Nominal Coverage: 100 x 100 degrees
- Nominal Sensitivity: 87 dB SPL, 1W @ 1 m (3.3ft)
- Maximum SPL: @ 1m
- 113 dB continuous peak pink noise
- 107 dB continuous average pink noise
- 103 dB continuous average music or speech
- Directivity Factor (Q): 4.9, averaged 500 Hz to 4 kHz
- Directivity Index (DI): 6.9 dB, averaged 500 Hz to 4 kHz
- Nominal Impedance: 8 ohms
- Minimum Impedance: 6.7 ohms at 230 Hz
- Crossover Type:
- Second Order Lowpass
- Second Order Highpass
- Complex Optimization for Maximally Flat Response
- Transformer Taps:
- 170V: 60W, 30W, 15W, 7.5W taps (Taps #4, #3, #2 & #1)
- 100V: 60W, 30W, 15W taps (Taps #3, #2 & #1)
- Thru position: 8 nominal
Transducers
- Low-Frequency:
- 5.25 inch polypropylene-coated paper with WeatherEdge surround
- 1 inch voicecoil on kapton former
- High-Frequency: .75 inch titanium coated PEI
Physical
- Enclosure Material: High Impact polystyrene
- Grille: Painted stainless steel
- Overload Protection:
- Full-range power limiting to protect network and transducers
- Internal fuse to protect during exceptional overload condition
- Termination:
- Screw-down terminal strip
- Zinc-plated copper base
- Nickel plated metal screws/washers
- Rotation:
- Against wall on InvisiBall Base: 37 degrees vertical 44 degrees horizontal
- On bracket: 44 degrees; all directions
- Included Accessories:
- 1 Pr MTC-PC input panel cover
- InvisiBall mounting base
- 6 mm x 100 mm InvisiBall hex wrench
- Dimensions (HxWxD): 9.3 x 7.4 x 6.3 inches (236 x 186 x 159 mm)
- Net Weight: 9 lbs (4.0 kg) each
- Shipping Weight: 20 lbs (9.0 kg) pair
- Safety Agency Rating: Transformer is listed per UL1876
|
|
Rate and Review this Product:
|