|
1 Review (s) - 1 Rating (s)
Joe Meek Track Pack Vocal Condenser Microphone PackageThe Joe Meek Track Pack includes the JM37-DP studio condenser microphone, a Joemeek ThreeQ preamp, travel case, mic pop filter, and a mic shockmount - all for an incredible price. Upgrade your studio to the signature sound of Joe Meek today!
The Joe Meek JM37-DP is a high quality, large diaphragm condenser microphone with Cardioid and Omni patterns. By utilizing FET devices for both preamplifier and output stages, we created a microphone that's destined to be your go-to mic for a variety of recording purposes.
Joemeek used a classic center-electrode design for the capsule, which provides very smooth extended frequency response. Then they used dynamic feedback at the capacitor element, which further enhanced the audio quality by eliminating distortions that may occur at high SPL.
The large 1.035-inch dual diaphragms are manufactured from micro-fine Mylar with gold sputtering. The body is machined from solid brass, with connection to the outside world via a 3 Pin XLR connector. Power is supplied via Phantom Power from either your console or microphone preamplifier.
An excellent choice for male and female lead vocals, the JM37-DP also excels at recording choir, orchestral and other acoustic instruments.
The Joe Meek ThreeQ is like having one channel of a professional recording studio in a small box. It takes a microphone or instrument, amplifies it, compresses and equalizes it ready to be recorded. Simple to use yet extremely powerful, the ThreeQ will bring out the best in any microphone or instrument and give the gloss of a professional studio production to all your performances. As well as recording it will also be found useful for live work.
Joe Meek JM-37DP Specifications
- Frequency Response: 25Hz-20KHz
- Sensitivity: 16mV/Pa-40+/-2dB (0dB= 1 V/Pa 1000Hz)
- Polar Pattern: Cardioid and OMNI with Selectable PAD
- Impedance: 200 ohms
- Equivalent Noise Level: 19dB (A Weighted)
- Maximum SPL for 0.5% THD@1000Hz: 128dB
- Power Requirement: 48V
Joe Meek ThreeQ Specifications
- Input Impedance:
- Mic: 1.2kOhm
- Line: 20kOhm
- Pre-amp Overall Gain: 0dB to 60dB
- Common Mode Rejection: 70dB
- Equivalent Input Noise: -128.5dBu (unweighted)
- Distortion: 0.001% (below Compressor threshold)
- Frequency Response: 10Hz to 70kHz (-3dB)
- Maximum Input Before Clipping:
- Mic: +19.5dBu
- Line: +44.5dBu
- Headroom Before Clipping: +19.5dBu
- Compressor Threshold: -6dBu to +20dBu (variable)
- Compressor Ratio: 5:1 (typical)
- Compressor attack time: 1 msec to 100 msec (adaptive)
- Compressor Release Time: 0.1 sec to 3 sec (adaptive)
- Nominal Output Levels: +4dBu/-10dBv
- Output Impedance: 75ohm
- Output Level Switch: 12dB attenuation
- Noise Floor: -85dBu (typical, with ~40dB mic gain)
- VU Meter: 8 segment bargraph
- Power Supply: 12V ac mains adaptor
- Power Consumption: 12W
- Mechanical: 220W x 44H x 180D (overall)
- Weight:1 kilo
- EQ Boost and Cut: +/-15dB (zero phase-shift bell response)
- LF Frequency: 80Hz fixed
- MID Frequency: 300Hz to 5kHz variable
- HF Frequency: 12kHz fixed
Recommended Accessories for:
|
Minimum Item Quantity 1 is required to purchase. Item Quantity exceeds the limit -1 . Questions? Feel free to Call or Chat.
Rate and Review this Product:
 1 person rated this item  STEVEN RAY from Brandon,MS,United States steveray34@hotmail.com Overall Ranking:
Subject:
|
|
|
|
|
|