The Line 6 Floor Board Foot Controller is the dedicated foot controller designed especially for Line 6 Digital Guitar Amplifier Systems to give you instant access to all the amps' great features including Stomp Box-style Effects On/Off, Channel Select, Tap Tempo, a Tuner and Wah & Volume control pedals.
Designed to work best with Line 6's AX2 Flextone, Flextone II, Original POD, POD Pro, Bass POD, Bass POD Pro and Original Spider amplifiers. The Floor Board connects with a simple RJ-45 jack (a 20-foot cable is included).
Stomp Box-Style Effects On/Off
The Floor Board has two main modes of operation: Channel Select and Effect On/Off. Effect On/Off gives you instant direct access to your Digital Guitar Amplifier System's effects. Step on one of the sturdy steel Effect On/Off switches and the amp instantly responds by turning that effect on or off, just like a classic effect stomp box. Red lights above each Effect On/Off switch show you whether an individual effect is On (light on) or Off (light off) so you can see the details of your Channel's setup at a glance.
Wah and Volume Control Pedals
The Floor Board's two built-in continuous pedals control the Wah and Volume effects of the Digital Guitar Amplifier System. The Wah Pedal includes a toe-down on/off switch just like a classic wah pedal, and its tone is modeled after a vintage Vox wah for a very musical, expressive sound. The audio signal from your guitar doesn't go through the Floor Board - these are just remote controls for the Digital Guitar Amplifier System's processing. That means the guitar signal always stays inside the amp and in the digital domain, safe from the kind of hum and interference that you can get when using traditional pedals on-stage.
The Floor Board has two main modes of operation: Channel Select and Effect On/Off. Channel Select gives you seamless switching between all of your Digital Guitar Amplifier System's Channels. You can choose between Preset and User Banks right from the Floor Board's stomp switches, as well as switching between the individual Channels in those banks.
The Floor Board gives you the same Tap Tempo control of effect times as you get from your Digital Guitar Amplifier System. With the AX2, Tap Tempo controls the speed, or tempo, of your delay effects. Just tap a couple of times on the Tap Tempo stomp switch. Now the individual echoes of your delay will happen in time to the tempo you just tapped on the switch. You can store the new delay time with the Channel if you like, so that it will be recalled the next time you choose that Channel. With a Flextone or POD, the Floor Board Tap Tempo control can also be used to set the speed of your other effects, just like the Tap Tempo button on the Flextone top panel.
Digital Chromatic Guitar Tuner
Hold the Tap Tempo stomp switch for a moment, and you access a built-in chromatic digital tuner. The Floor Board display shows you the pitch you are tuning to, and the red lights above the six lower stomp switches show if you are sharp or flat. The basic idea is that the lights to the left are on if you're flat, and the lights to the right are on if you're sharp. When you get a note in tune, the two center lights come on at the same time.
20 Foot Control Cable Included
The lockable RJ-45 jack locks in to both the Floor Board and the Digital Guitar Amplifier System, so you never have to worry about accidentally kicking it loose during the gig. The special design of the Line 6 products lets this one cable carry all the control signals at the same time as supplying the Floor Board with power from the amplifier. So there's no clumsy wall wart or tangle of cables to complicate your setup. The Floor Board is so simple to use that the entire operations guide fits on two pages.