Mackie SRM150 5 Inch Compact Active PA SystemMackie SRM150 Compact Active PA System Proof That Size Doesn't Matter.
The SRM150 combines Mackie's proven mixer and SRM Active loudspeaker technologies to create a powerful, great-sounding 3-channel PA system that is ultra-compact, versatile and expandable. The Mackie SRM150 Compact Active PA System is ideal for a wide variety of applications ranging from boardroom A/V to live musical performance in coffee houses, piano bars, or rehearsals, just to name a few.
|
Mackie SRM150 FEATURES
- Extremely portable active loudspeaker system
- Built-in Mackie mixer for superior sound quality with:
- 3-channel mixer with 3-band active EQ
- Two high-headroom Mackie Mic/line preamps with 48V phantom power
- Instrument-ready input (no DI required)
- Dedicated stereo channel for keyboards, CD, MP3, iPods, etc.
- Neutrik® Combo "line in" for linking or adding inputs
- XLR "thru" with mic/line switch for linking more SRM150s or direct send to main PA
- 150-watts of high output, Class-D power
- 5.25” premium-quality, full-range neodymium driver
- Frequency Response: 100Hz to 17.5kHz
- Complete system protection with built-in limiter
- 120 dB Maximum SPL@1meter
- Built-in top carry handle
- Integral aluminum heat sink
- Mic stand integration system for use with stand and boom
- Tough, impact-resistant, polypropylene enclosure
|
 |
System Specifications
- Frequency Response (–3 dB) 100 Hz – 17.5 kHz
- Frequency Range (–10 dB) 60 Hz – 22 kHz
- Max SPL Long-term @ 1m 110 dB
- Max SPL Peak @ 1m 120 dB
Mixer Section
- Frequency Response (–3 dB)
- Mic Input to Line Out (Gain at 0 dB)
- 5 Hz – 40 kHz (+0, –1 dB)
Input Impedance
- Mic 3 kohm balanced
- Hi-Z 2 0 kohm balanced
- Instrument 1 Mohm
- Line 10 kohm balanced
- Stereo 10 kohm balanced
Maximum Voltage Gain
- Mic Input 1 51 dB
- Mic Input 2 51 dB
- Stereo Input 9 dB
Maximum Input Level
- Mic –28 dBu, gain at +50 dB
+15 dBu, gain at +6 dB
- Line –8 dBu, gain at +30 dB
+35 dBu, gain at –15 dB
- Stereo +20 dBu, gain at 0 dB
3-Band Equalization
- High ±15 dB @ 12 kHz
- Mid ±15 dB @ 2.5 kHz
- Low ±15 dB @ 100 Hz
- Line Out Pad –30 dB
Common Mode Rejection Ratio (CMRR)
55 dB @ 1 kHz, gain at unity
Noise
(20 Hz to 20 kHz BW, 150 ohm source impedance)
- Equivalent Input Noise (EIN)
–129 dBu
- Residual Output Noise
(Line out, channel and master levels off)
–85 dBu
Power Amplifier
- Rated Power 100 watts rms continuous,
2 0 Hz to 20 kHz
- Maximum Power 150 watts peak
- Rated THD 0.05%
- Cooling Convection Extrusion
- Design Class D
Transducer
- Diameter 5.25 in/134 mm
- Voice Coil Diameter 1.0 in/25.4 mm
- Sensitivity (1W@1m) 90 dB
- Nominal Impedance 8 ohms
- Power Handling 150 watts
- Frequency Range 90 Hz – 20 kHz
- Magnet Type Neodymium
Safety Features
- Overload Protection Limiter
- Thermal Protection Amplifier shutdown, auto-reset
Construction Features
- Material Polypropylene
- Finish Grey textured finish
- Handle Top mounted
- Grille Perforated metal with weatherresistant
coating
Physical Properties
- Height 8.0 in/20.3 cm
- Width 11.2 in/28.4 cm
- Depth 6.8 in/17.3 cm
- Weight 7.6 lb/3.4 kg
- Mounting Methods Mic stand mountable via the built-in
socket on the bottom of the cabinet
with the supplied adapter.
AC Power Requirements
- 100 VAC – 240 VAC, 50/60 Hz, 35 VA
- AC Connector 3 -pin IEC 250 VAC
