Musical Instruments American Musical Supply My Account Track Order Wish List Chat for Help Request Catalog AMS Forum
You now have
FREE Shipping*
 
Call Us 24/7 At: 1-800-458-4076
 
SHOP BY BRAND
Akai | Alesis | Behringer | Epiphone | Fender | Gibson |
Ibanez | JBL | Korg | Line 6 | Mackie | See All Brands |

 

 
Mackie
Mackie SRM350 V2 Powered PA Speaker
Collapse 
Mackie SRM350 V2 Powered PA Speaker

The Mackie SRM350 v2 shares the same design as the SRM450v2, but is even more compact. The SRM350v2 Active loudspeaker is the perfect solution when space is at a premium.
The SRM350v2 retains the best of the original SRM design, including its signature Mackie Active architecture and renowned rugged durability. But with ultra-efficient switching power supplies, a lightweight neodymium woofer, an all-new compression driver and Class-D Fast Recovery amplification (165W LF/30W HF), the SRM350v2 packs way more power, clarity and punch. And its wide dispersion, outstanding bass extension and ultra-low distortion mean the SRM350v2 delivers pure studio monitor performance at full-on loudspeaker levels.

Mackie SRM350 v2 Features

  • 2-way bi-amplified, optimized Active loudspeaker system
  • High-output, titanium dome compression driver
  • 10-inch Neodymium long-throw low frequency transducer
  • 165-Watt class-D, Fast Recovery Low Frequency amp; 30-Watt High Frequency amp
  • Ultra-wide, smooth dispersion via HF waveguide
  • Built-in phase accurate 24dB Linkwitz-Riley electronic crossover
  • Electronic time correction, phase alignment and EQ for studio quality sound
  • Mic/line input and pass-thru connector
  • Lightweight for ultimate portability (26 lbs)
  • Flyable, Pole mountable, Floor wedge-able

The SRM Stands for Sound Reinforcement Monitor
Over a decade ago, Greg Mackie and a dedicated team of engineers set out to create a portable loudspeaker that could deliver studio monitor sound quality. Unlike a relatively small, acoustically controlled studio where the sweet spot is well defined, live venues vary greatly, and most are far from acoustically balanced. Despite the challenges, after two years of extensive research and development, the first Sound Reinforcement Monitor was born - a loudspeaker that truly lived up to its name. The SRM350v2 continues the SRM350’s tradition of studio monitor sound quality - and trumps it - to deliver sound that makes any venue seem like a well-tuned studio.

Ultra-Wide Dispersion
Undoubtedly you’ve been to a show where the sound is all over the map - stand in front of the band, it sounds okay, but move a little to your left or right and all of a sudden you’ve got mud in your ears. When the SRM350v2 loudspeakers are on stage, no matter where you stand, you hear sound with impeccable stereo imaging, depth of field and definition - at full-on loudspeaker levels. This is due to the SRM350v2’s wide dispersion pattern, which is achieved through its High Frequency waveguide.

Professional Grade Transducers
The SRM350v2 has sounds even better than the original, in part, because of it’s premium transducers.  The new 10-inch neodymium woofer has less mass and quicker response providing incredibly punchy response from such a small loudspeaker.  Not to mention it is much lighter than a traditional ceramic magnet based transducer.  Additionally, its titanium compression driver provides sparkle and clarity beyond the original design keeping its characteristic sound in-line with its big brother, the SRM450v2.  The acoustic gurus out at EAW spent months and months tweaking these custom designed transducers so that the SRM350v2 would deliver the best sound possible in a small format box.

Super low distortion thanks to Mackie’s own Class-D, Fast Recovery Amplification With its combination of Class D topology and Fast Recovery circuitry, the SRM350v2 operates with incredible efficiency, and delivers much more power and clarity. With this Class D Fast Recovery amplification, as we’ve lovingly (and creatively) dubbed the technology, the SRM350v2 handles maximum volume - and associated heat - with ease, so there’s no unwanted noise, and no thermal problems. Even after hours of sustained use at near-peak levels, your sound remains clean and your SRM350v2 keeps cool. Read more.

Legendary Active Electronics
In a passive loudspeaker setup, an external amplifier is connected to a passive crossover inside the speaker, which distributes frequencies to the transducers. Because power amps and transducers vary widely in sound and quality, trying to match the right power amp with the right speaker can be challenging, especially if you’re not a professional acoustic technician - or rolling in cash so you can hire one. Mackie's proven Active design does all the work for you. With the SRM350v2, you get a complete loudspeaker system, with complex electronics and carefully chosen components, all precisely tuned and tweaked to work together. The result is a loudspeaker with phenomenal sound quality and power, that’s completely plug-and-play - no EQ needed. Learn what’s inside.

Built-in Protection Circuitry for Long Life
Mackie knows that our Active loudspeakers are pushed hard - often to, or beyond, the limit. That’s why they have reliable protection circuitry built in to every one. The SRM350v2 employs a built-in limiter for less distortion at peak levels. And thanks to the advanced technology of its power supply and Class-D amp topology, the SRM350v2 is greater than 90 percent efficient - more of the power from your outlet goes straight to the transducer, without the power supply and amp giving off loads of heat. Less heat means better performance, and longer life.

Versatile, Portable, Tough - And They Look Good, Too
When designing the SRM350v2, Mackie considered every angle. From every angle is just how you can position it, too - pole-mount it from the bottom, fly it vertically or horizontally via its optional hanging bracket, or use it as a wedge monitor. With all this flexibility, it’s the most versatile portable Active loudspeaker around. And now moving it into place is easier than ever. Weighing in at just 26 pounds- now that’s light! You’ll have more than enough strength left over to deliver an electrifying performance after loading in. Plus, the SRM350v2 retains its rugged, Mackie built-like-a-tank durability, thanks to the polypropylene cabinet - now in a tasty hue of Midnight Blue. So not only do you get a portable loudspeaker that sounds phenomenal, you get one that’s tough and portable for the road, and handsome enough for the show.

Collapse 

Mackie SRM350 v2 System Specifications

  • Frequency Response (–3 dB): 83 Hz - 18.5 kHz
  • Frequency Range (–10 dB): 61 Hz - 22 kHz
  • Maximum SPL Long-Term @ 1m: 118 dB
  • Maximum SPL Peak @ 1m: 121 dB
  • Crossover: Linkwitz-Riley 24 dB/octave @ 2400 Hz

Audio
  • Input Type: Balanced Differential
  • Input Impedance: 94k ohms
  • Sensitivity (center detent):
    • Line: +4 dBu
    • Mic: –36 dBu
  • Maximum Input Level: +22 dBu
  • Acoustic Contour Equalization (peaking):
    • +3 dB @ 100 Hz
    • +3 dB @ 12 kHz
  • Operating Temperature Range: –10ºC - 45ºC (14ºF - 113ºF)

Power Amplifiers
  • Low-Frequency Power Amplifier:
    • Rated Power 165 watts continuous*
    • Rated THD < 0.03%
    • Cooling Convection Extrusion
    • Design Class D
  • High-Frequency Power Amplifier:
    • Rated Power 30 watts continuous*
    • Rated THD < 0.03%
    • Cooling Convection Extrusion
    • Design Class AB
* Rated power is continuous rms wattage into transducer’s rated impedance @ 1 kHz for the HF amplifier and @ 100 Hz for the LF amplifier.

Transducer Specifications
  • Low-Frequency Transducer:
    • Diameter: 10 inches (250 mm)
    • Voice Coil Diameter: 2.0 in (51 mm)
    • Sensitivity (1W@1m): 96 dB
    • Power Handling: 250 Watts RMS, long-term
    • Frequency Range: 61 Hz - 3 kHz
    • Magnet Type: Neodymium
  • High-Frequency Transducer:
    • Diaphragm Diameter: 1.4 in/36 mm
    • Horn Exit Diameter: 1 in/25.4 mm
    • Diaphragm Material: Titanium
    • Sensitivity (1W@1m): 104 dB
    • Nominal Impedance: 16 ohms
    • Power Handling: 75 Watts RMS, long-term
    • Frequency Range: 1 kHz - 20 kHz
    • Magnet Type: Ceramic
  • Horn Design:
    • Horizontal Coverage: 90º (1 kHz - 20 kHz)
    • Vertical Coverage: 80º (1 kHz - 20 kHz)
    • Mouth Size: 11.1 in x 6.1 in (283 mm x 154 mm)

Enclosure Construction Features
  • Basic Design: Asymmetrical Trapezoidal
  • Material: Polypropylene
  • Finish: Midnight blue textured finish
  • Handles: One on side, one on top
  • Grille: Perforated metal with weather-resistant coating

Line Input Power
  • Power Consumption: 120 watts with musical program and LIMIT LED blinking
  • US: 120 VAC, 60 Hz
  • Recommended Amperage Service: 2.5 amps
Note: The SRM350v2 does not support multiple voltage configurations.

Control System Functions
  • Electronic Crossover
  • Phase Alignment
  • Equalization
  • Parametric Equalization

Safety Features
  • Protection: Low-frequency Dynamic Bass Protection, Power Supply, and Amplifier Thermal Protection
  • Display LEDs: Signal, Power, Limit

Physical Properties
  • Height 20.75 in (527 mm)
  • Width: 13.10 in (333 mm)
  • Depth: 12.25 in (311 mm)
  • Weight: 26 lbs. (11.8 kg)

Mounting Methods
  • Optional hanging brackets for top and bottom of enclosure (SRM350 Bracket Kit: Part No. 0016404).
  • Never attempt to suspend the cabinet by its handles.
  • The SRM350 v2 is pole-mountable via the built-in socket on the bottom of the cabinet. Be sure the pole is capable of supporting the weight of the SRM350 v2.

Mackie's Disclaimer
Since we are always striving to make our products better by incorporating new and improved materials, components, and manufacturing methods, we reserve the right to change these specifications at any time without notice.

Mackie and the Running Man figure are registered trademarks of LOUD Technologies Inc.
All other brand names mentioned are trademarks or registered trademarks of their respective holders, and are hereby acknowledged.

2004-2007 LOUD Technologies Inc.
All Rights Reserved.


 
 
Collapse 
Expand 

 
Price Match Plus
 
Quantity:
Add to CartAdd to Wish List
Email this Page to a Friend
Rate and Review this Product:      Rate It
1 person rated this item
Heajerk from Va. Beach, VA
Overall Ranking:
Quality:
Features:
Value:
Ease of Use:
Sound:
Subject:Great stage monitor!
Quality: I have had zero issues with these, and any of the other Mackie products I own. The plastic enclosures scratch up a bit if you're not carefull, and when you prop it up when using it as a monitor, it does put a little added stress on the power cable and xlr going into the back, but if you're smart about it, and watch what you're doing, these will last a good long time.
Features: This speaker has great coverage due to it's use of a wave guide instead of horn loading the hf driver. That makes a big difference on a crowded stage when guitar amps or other musicians are usually drowning everything else out. I do wish the angle was a little greater when sat on it's side, I usually have to prop it up with a direct box to get the proper angle on it.
Ease of Use: Plug in, set the gain and leave it alone, how easy is that? Mackie writes a great manual, and normal people can understand it while experienced people don't feel dumb reading it.
Sound: I love the sound of these as monitors. I use a DBX Driverack PA with them and wow, they rock. They're crystal clear and the wave guide helps them not get lost in the stage volume. They are not gonna blow you away, they only 195 combined watts RMS, so be smart about it, they have their limits, but when used properly, these are really hard to beat in terms of clarity and coverage.
Value: For the money, there is no better speaker. It's compact, light and has adequate power for use as a stage monitor. The QSC K10 are better speakers, but they cost $200 more, are mush heavier, and are covered in that crappy duratex style finish that looks like garbage after 2-3 uses. Go Mackie!
Do you own this product?: Yes
Date submitted: 10/30/09
Sign up or view your wish list

"I contacted customer support about matching a price and was pleased to see that they did. The products actually got to my house within 24 hours of my purchase. Can't argue with that kind of delivery." Nov '09