The M Audio SBX10 Studio Subwoofer represents the perfect addition to any studio monitor setup. The SBX10 is designed to give your monitoring system some serious low end. It delivers tight, clean bass response down to 20Hz, revealing the extreme low frequencies in your music so you can make accurate mixing decisions. Comprising a 10” fiberglass/paper composite driver, a 240-watt all-discrete internal amplifier, and a variable 50-200Hz crossover, the SBX10 subwoofer delivers unbeatable performance in a compact chassis. It is works well for studios where space is tight. An oversized magnet, high-temperature voice coil, high-density cabinet and a full complement of inputs are just some of the additional components that round out this high-quality design. The unit even includes a bypass footswitch so you can easily judge how mixes will sound with and without a dedicated subwoofer.
M Audio SBX10 Studio Subwoofer Features:
Engineered Especially for M-Audio Monitors
- 10” fiberglass/paper composite cone driver with oversized magnet and high-temperature 2” long-throw voice coil
- 240-watt Class A/B amplifier with all-discrete transistor design
- Flared rear bass-reflex port
- Variable 50-200Hz crossover
- 20-200Hz low frequency response
- Adjustable gain (-30dB to +6dB)
- Balanced/unbalanced XLR, balanced/unbalanced 1/4” TRS and RCA inputs
- Balanced/unbalanced XLR and balanced/unbalanced 1/4” TRS outputs allow easy setup of 2.1 monitoring systems
- Includes subwoofer bypass footswitch
- Phase switch (0°/180°)
- Over-temperature protection
- Vinyl-covered high-density internally braced 3/4” MDF cabinet with 1” front and back baffles
- Removable grill
- Removable feet
Designed for use with the M-Audio CX and BX Deluxe series—or most other studio monitors—the SBX10 active subwoofer delivers the kind of bass response necessary for music, film and multimedia projects. Since today’s personal audio systems are designed to reproduce very low bass frequencies, it is critical that your audio production environment allows you to monitor and adjust those frequencies while you are mixing. When paired with either the M-Audio CX or BX Deluxe studio monitors, the SBX10 becomes part of an integrated system that provides accurate monitoring for the entire 20Hz to 20kHz spectrum. Of course, it enhances most other direct-field monitors as well.
Rock-Solid Bass Performance
Bass you can feel takes some heavy-duty power and components. That’s why the SBX10 carries a hefty 240 watts of totally discrete Class A/B power for tons of headroom. The 10-inch driver features an oversized magnet and a high-temperature, long-throw voice coil, delivering maximum low frequency output and optimized power handling. The cabinet is made of 3/4-inch vinyl-clad MDF with 1-inch front and back baffles, serious internal bracing and a flared rear bass-reflex port to minimize turbulence and improve low frequency efficiency. The fiberglass/paper composite driver provides exceptionally accurate bass response, resulting in a clean and refined low-frequency extension that minimizes listener fatigue.
Don’t Strain Your Speakers—Or Your Ears
Studio monitors like the CX5 and BX5a Deluxe are designed to work well as full-range monitors. Yet when they reproduce extremely bass-heavy material at high volumes, it can be both taxing on the speakers and fatiguing to the listener. When they’re used in tandem with the SBX10, however, the system can comfortably reproduce full-range signals at higher levels without stressing the components.
No More Guesswork
A good monitoring system allows you to create material that translates well across a variety of playback environments. As such, it’s important to know what your mixes will sound like both with and without the low-frequency extension a subwoofer provides. Fortunately, the SBX10 includes a subwoofer bypass function that completely removes the subwoofer amp, speaker, and crossover from the signal path—sending the full-bandwidth program to your direct-field monitors. By plugging in the included footswitch, you can control this function dynamically as you’re playing back your material—even from across the room.
Active Crossover for Two-Channel Setups
The SBX10 subwoofer accepts the two-channel stereo outputs from your mixer, audio interface or sound card, and your main monitors connect to the subwoofer’s outputs. The internal crossover network of the SBX10 splits the signal at a user-defined crossover frequency (50-200Hz), routing everything below it to the internal sub and everything above it to the main speakers. This significantly improves fidelity because the components aren’t tripping over each other to reproduce the same frequency—and each only has to deliver frequencies to which it is ideally suited. The variable crossover makes it possible to tailor the bass response in your monitoring environment in order to achieve the most accurate acoustic response—both in studio and home theater applications.
bass-reflex active powered subwoofer
10-inch composite (treated paper/fiberglass) cone with high-temperature voice coil and damped rubber surround
HP/LP linked filter sweepable from 50-200Hz; 24dB/octave 4th-order alignment
80mV pink noise input produces 100dBA output SPL at one meter with volume control at maximum
(-30dB to +6dB)
240 watts average power into 4, discrete transistor design
THD at rated power, mono mode:
two XLR balanced/unbalanced inputs; two TRS balanced/unbalanced inputs; two unbalanced RCA
two XLR balanced/unbalanced outputs for satellites; two TRS balanced/unbalanced outputs for satellites
volume/gain control, phase inverse switch, variable crossover control, subwoofer bypass footswitch jack
20k ohms balanced, 10k ohms unbalanced
Maximum input level:
over temperature, turn-on/off transient, subsonic filter, external mains fuse, DC protection, over current protection
power on (blue) or standby/bypass (red)
dual-voltage (selectable by rear-panel switch) for either 100-120V/~50/60Hz or 220-240V/~50/60Hz; powered via detachable grounded IEC cable
vinyl-laminated high-density internally braced 3/4” MDF cabinet with 1” front and back baffles
15.5 in. (h) x 13 in. (w) x 17.25 in. (d); 39.4 cm (h) x 33 cm (w) x 43.8 cm (d)
54.6 lbs.; 24.75 kg