Moog Music MF107 MoogerFooger FreqBox Synthesizer PedalThe MOOG MF107 is a new signal processor that will definitely have you thinking outside the box. Use it on guitars for a swelling sound, or on vocals to provide a unique sounding backing track. Whatever the use, the MF107 will help you discover new creativity. Not only will the MF107 work with instruments like guitars, but it also accepts line level signals. Use it on a keyboards, samplers, electronic drum kits and more.
The MF-107 Freq Box contains an analog VCO with
continuously variable waveform which can be modulated
by the audio input signal. Modulation of the VCO includes:
hard sync, Frequency Modulation, and modulation of the VCO
frequency by an envelope follower. The amplitude of the
VCO is controlled by the amplitude of the input signal.
Front Panel Controls
- Frequency - sets the frequency of the VCO.
- Wave - Morphs the VCO waveform from Triangle
to Sawtooth to Square to skinny pulse.
- Sync On/Off - Enables/ Disables Hard sync of
the VCO by the audio input signal.
- Envelope Amount - Sets the amount of modulation of the VCO
frequency by the Envelope
Follower.
- FM Amount - Sets the amount of frequency
modulation of the VCO by the audio input signal.
- Mix - Sets the blend of input signal and VCO
signal
- Drive - Sets the input sensitivity and gain of
the effect when active. Half to full drive amount adds overdrive.
- Output level - Sets the output level of the
effect when active.
- Bypass Switch - Bypass LED is red when effect
is off, and green when effect is on. The MF-107 uses a
high quality buffered bypass – when in bypass, the input
is disconnected from the effects’ electronics.
I/O
Input and output connections are on 1/4 inch jacks.
- Audio Input - accepts instrument level to
line level inputs.
- Freq - Accepts EP-1 expression pedal, or -5 to
+5V Control Voltage to set the frequency of the VCO. Input
voltage is added to position of the front panel Frequency
control.
- Wave - Accepts EP-1 expression pedal, or -5 to
+5V Control Voltage to set the waveform of the VCO. Input
voltage is added to position of the front panel Wave
control.
- Envelope Amt - Accepts EP-1 expression pedal, or 0
to +5V Control Voltage to set the amount of envelope
follower modulation of the VCO frequency. Input voltage
is added to position of the front panel Env. Amount control.
- FM Amt - Accepts EP-1 expression pedal, or 0 to
+5V Control Voltage to set the amount of frequency
modulation of the VCO by the audio input. Input voltage
is added to position of the front panel FM Amount control.
- Mix - Accepts EP-1 expression pedal, or 0 to +5V
Control Voltage to set the waveform of the VCO. Input
voltage is added to position of the front panel Mix control.
- Audio Out - Supplies the output signal.
- Env Out - Outputs the unconditioned Envelope
Follower Control Voltage signal.
- Osc Out - Outputs the wave-shaped VCO signal
as a +/-2.5V Control Voltage signal.
Recommended Accessories for: