|
Model Options:
1 Review (s) -
4 Rating (s)
Nady MGT 16 UHF Instrument Wireless SystemThe Nady MGT 16 is the perfect solution for guitarists or bassists who want the freedom to rock on stage without that voice in the back of your mind saying don't trip over the cord, please don't trip over the cord. With an operating range of up to 250 feet and 16 user selectable UHF frequencies, you will have interference free operation without losing tone.
Nady MGT 16 Instrument Wireless Features
- UHF wireless system for guitar/bass
- 16 user-selectable PLL frequencies for interference-free operation
- Up to 250 feet operating range, line-of-sight
- Infrared ASC Auto-Sync Channels transfer from receiver to transmitter for instant setup
- Battery operated receiver and transmitter
MGT 16 Receiver
- Compact, portable, pedal style receiver
- Dual 1/4 wave antennas
- Infrared sync with transmitter for instant setup
- Unbalanced 1/4 inch line out jack
- Power On/Off/Mute switch; Volume Control; LED indicators for Power On, Low Battery Alert, and RF Reception; DIP-switch channel selection with IR sync to transmitter
- Powered by DC adapter (included) or two AA alkaline batteries for portability (up to 8 hours battery life)
MT 16A / MT 16R Transmitters
- Choice of two transmitter housings: MT-16A with 30 degree angled 1/4 inch plug for use with either recessed or surface mounted jacks, or MT-16R with 90 degree angled 1/4 inch plug for surface mounted jacks only
- Up to eight hours of battery life from a single AAA alkaline or NiMH rechargeable battery
- Infrared channel sync with receiver for instant setup
- Power On/Off switch; Power/Low Battery LED indicators; IR Sync LED; Input Level attenuation switch; internal Audio Level control trim-pot
- External flexible antenna
Nady MGT 16 UHF Instrument Wireless Specifications
- Frequency Response: 50Hz-16kHz (-3dB)
- Dynamic Range: 120dB
- Oscillating System: Phase Lock Loop (PLL)
- Total Harmonic Distortion (THD): <0.8%
- RF Carrier Frequency Range: 902.40MHz-923.70MHz
- Modulation: FM (F3E), +/-30KHz normal
- Operating Range: Up to 250 feet (typical, depending on site conditions)
MGT 16 Receiver:
- Controls:
- Audio Level
- Power ON/MUTE/OFF
- Frequency Select DIP-switches
- IR sync button
- Connectors:
- Unbalanced 1/4 inch
- DC Adapter input jack
- LED Indicators:
- Power ON (Red-continuous)
- Low Power (Orange-continuous)
- RX reception (Green)
- Antennas: Dual 1/4 wave, adjustable orientation
- Signal-to-Noise Ratio: >105dB (w/AC/DC power supply)
- Receiver Sensitivity: -110dBm nominal, 12dB SINAD
- Squelch Sensitivity: -95dBm (minimum/normal setting), adjustable
- Output Impedance: 1.0K Ohms
- Power Consumption: DC: 3V/ 115mA or AC/DC adapter: 10VDC/200mA
- Battery: Two AA alkaline or NiMH
- Battery Life: Up to 8 hours
- Dimensions (WxDxH): 2.75 x 5.00 x 1.88 inches (7.0 x 12.7 x 4.78 cm)
- Weight (without batteries): 5.7 oz (161.6 g)
- Housing Construction: ABS Plastic
MT-16A/R Transmitter:
- RF Power Out: 25mW nominal, 50mW maximum
- Harmonic & Spurious Emissions: -50dB
- Controls: Power ON/OFF, 15dB Attenuation Pad select switch
- LED Indicators: Power ON (Red-single flash), Low Battery (Red flash)
- Input Impedance: 500 kOhms
- Power Consumption: DC 1.5V/90mA
- Battery: One AAA alkaline
- Battery Life: Up to 8 hours
- Antenna: 1/4 wave, permanently attached
- Dimensions (WxDxH): MT 16A: 4.5 x 2.0 x 1.0 inch (11.43 x 5.08 x 2.54 cm), MT 16R: 3.5 x 2.5 x 1.0 inch (8.9 cm x 6.35 cm x 2.54 cm)
- Weight (without batteries): MT 16A: 1.2 oz (34 g), MT 16R: 1.1 oz (31.2 g)
- Housing Construction: ABS Plastic
Recommended Accessories for:
|
Minimum Item Quantity 1 is required to purchase.
Item Quantity exceeds the limit 0 . Questions? Feel free to Call or Chat.
|
|
|
|
|
|