Model Options:
Nady PEM500 UHF Wireless In Ear Monitor SystemThe Nady PEM 500 system includes one transmitter and one beltpack receiver with earbuds.
The Nady PEM 500 in-Ear Personal Monitor System, offers all of the advantages of wireless in-ear monitoring - mobility, freedom from feedback, and you no longer have to drag heavy cabinets with you! For the first time, a wireless in-ear monitor system combines state-of-the-art advanced frequency-agile synthesized UHF technology, high-end performance and unprecedented affordability. 16 channels are selectable within the system for trouble-free operation. The miniature lightweight (yet powerful) in-ear speakers are supplied with three different sized of soft rubber mounts for the ideal fit for every user. The lightweight receiver body pack features a switchable built-in volume limiter and low battery indicator. The transmitter features a rear-mounted detachable antenna, and front-panel controls for channel selection and input level. Up to 6-hour battery life. Nady PEM 500 Features
- Available on selected frequency bands within the UHF band for interference free, long-range performance (up to 8 systems can be operated simultaneously, depending on country and frequency band)
- System consists of PEM-500T transmitter and one bodypack PEM-500R receiver, both of which offer 16 channel user selectability. Any number of additional receivers can be operated with the same transmitter if set to the same channel.
- Proprietary companding circuitry for wide Dynamic Range and clear, natural sound
- Operating Range: up to 300 feet typical (depending on site conditions)
- Rugged, foam-padded traveling case provides easy safe transport and storage.
Nady PEM 500 Transmitter
- Rugged, all metal half-rack that can be rackmounted singly or side by side with optional rack kits
- Microphone input allows wireless cueing of performers on stage
- Front panel features input level control, stereo headphone monitor output jack and volume control, select button for choosing one of 16 UHF channels, LED channel display, and Left/Right 10-segment audio input level displays.
- Back panel provides BNC jack for detachable antenna, a 1/4” TRS balanced microphone input, and an XLR and 1/4” combo jack for Left and Right Line inputs.
- Externally powered by AC/DC power adaptor
Nady PEM 500 Receiver
- Portable bodypack receiver features a switchable built-in volume limiter, output level control, and two-color (red/green) 3-way unit ON/Signal/Low Battery LED indicator.
- Operates up to 6 hours (depending on volume) on a 9V alkaline battery
- Each receiver is supplied with a pair of miniature, lightweight (yet powerful) in-ear speakers with soft rubber mounts in 3 sizes (small, medium, and large) designed for “custom” form-fitted comfort and optimum acoustic transfer and isolation.
- Rear clip can be rotated 90° for attaching receiver vertically or horizontally to clothes.
Nady PEM 500 Specifications
- Operating Frequency Range: 564.000 to 574.300 MHz, country dependent
- Modulation: Mono or stereo (MPX with pilot tone), FM: F3E +/- 60 KHz, nominal
- Audio Frequency Response: 50 ~ 12,000 Hz
- T. H. D.: < 1%
- Signal-to-Noise Ratio: > 80 dB, with proprietary companding noise reduction
- Operating Range: Up to 300 feet typical (depending on site conditions)
Nady PEM-500T Transmitter
- RF Output Power: Max. 50 mW (country dependent)
- L/R Audio Line Inputs
- Input Impedance: 600 ohms
- Nominal Input Level: 0 dBm
- Max. Input Level: +6 dBm
- Headphones Out Power: 100 mW max. @ 32 ohms, 190 mW @ 16 ohms
- Spurious Emission: > -55 dBc
- Frequency Stability: +/- 100 PPM
- Controls: Power ON/OFF, STEREO/MONO and channel select switches; input level, headphones monitor volume controls
- Connectors: 1/4” stereo headphones monitor out, 1/4” TRS balanced mic input, balanced XLR L& R line input, and 2.1 mm barrel-type DC input jacks; BNC antenna socket
- Indicators: Power ON LED; channel and 10-segment L/R audio input LED displays
- Antenna: 1/4 wave rigid detachable, BNC mount
- Power Requirement: 12-15V/500mA, AC/DC adaptor supplied (UL/CSA approved 120VAC or CE approved 230VAC)
- Dimensions: 8.27” x 9.13” x 1.73” (210 x 232 x 44 mm)
- Weight: 2.98 lbs (1.35 Kg)
Nady PEM-500R Receiver
- Maximum Audio Output Level: 20 mW
- Minimum Audio Output Load Impedance: 16 ohms
- RF Sensitivity: 2.5uV (-100 dB/12 dB SINAD)
- Squelch Threshold: < -90 dB
- Spurious Rejection: > 55 dBc
- Audio Output Connector: 3.5 mm Stereo (Tip=left, Ring=Right, Sleeve=ground)
- Controls: Volume adjust; limiter ON/OFF, power ON/OFF, STEREO/MONO select switches; 16-position channel selector switch
- Indicators: Two-color (red/green) 3-way unit ON/Signal/Low Battery LED
- Power Requirements: 9V alkaline battery
- Current Drain: < 40 mA
- Battery Life: Up to 6 hours, volume dependent
- Antenna: Internal
- Dimensions: 4.2” x 0.9” x 2.6” (106 x 23 x 66 mm)
- Weight: 2.85 oz (80 Kg)
Consumer Alert!Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones Note:All of the wireless systems that AMS sells comply with the FCC guidelines and regulations .We are presenting this information as a matter of legally required disclosure. Recommended Accessories for:
|
Minimum Item Quantity 1 is required to purchase.
Item Quantity exceeds the limit 0 . Questions? Feel free to Call or Chat.
|