Nady RSM2 Instrument Ribbon MicrophoneThe Nady RSM2 Ribbon Studio microphone is designed for use in contemporary, state-of-the-art studios, yet offers the unique natural sound previously only available on such classic large ribbon mics as the legendary RCA 44,which is still used to make great recordings today after almost 70 years. Perfect for recording studio vocals, acoustic instruments, strings, horns, orchestras and choral groups, ambient instrument audio, and many live sound applications. Powerful and versatile, and with the unmatched natural sound of classis ribbon mics, the RSM2 meets the stringent requirements of even the most demanding digital recording and live broadcasting applications.
Nady RSM2 Ribbon Microphone Features
- The unparalleled, uncompromised sound of a classic ribbon (velocity) mic
- Low-tension, 2-inch long, 2 micron thick aluminum ribbon design with typical large mellow ribbon audio reproduction with smooth, natural extended low and high ends
- Fast accurate transient response, ultra-high 165 dB SPL capability, unmatched transient response and overall stunning realism
- Figure-8 audio directional (pickup) pattern for both front and rear wide, extended sweet spots (as compared to large diaphragm condenser mics); and increased off-axis high frequency response on sides, with decreased high response above and below on-axis (though lower audio levels)
- Individual recording volume control of separate sources, through use of stereo mic setups wherein isolation is achieved by placing the source so that it is in the principal axis of one mic and the off-axis null of the other
- Manufactured with the finest materials with a machined housing with advanced internal shock mount construction for the highest structural integrity and rugged reliability
- Available in either gold or platinum finish grill assembly
- Integrated yoke mic stand mount and XLR cord included
- Soft padded carrying case supplied
Nady RSM2 Ribbon Microphone Specifications
- Type: Large Ribbon Geometry (LRG) ribbon (velocity) Microphone
- Ribbon Type & Dimensions: Pure aluminum, 2 microns thick,
50mm X 5mm (L X W)
- Polar Pattern: Figure 8
- Sensitivity: -55dB(0dB=1V/Pa)
- Frequency Response: 30 to 18,000Hz (+/- 3dB)
- Impedance: <= 200 Ohms
- Recommended Load Impedance: 1000 Ohms
- Maximum SPL (1% THD @1000Hz): 165 dB
- Equivalent Noise Level to IEC 268-4 (A weighted): 18 dB
- S/N Ratio re 1Pa: 70 dB
- Mic Cable: 3-pin XLR standard cable (attached)
- Size:
- Diameter: 2.7 inches (68.5mm)
- Length: 7.3 inches (185mm)
- Net weight: 44 oz. (1230g)
Specifications and design subject to change for improvement purposes without prior notice.
