Shure PGX14 UHF Guitar Wireless System  Channel H6  Item #: SHU PGX14 H6 

Multiple wireless units? Leading the industry again, AMS lets you choose your wireless frequency!

Channels
• Channel H6
• Channel J6
• Channel L5

You'll be amazed at the ease with which the system can be set up. With one touch of a button, the PGX4 Receiver's Automatic Frequency Selection function find an open channel from among the 90 frequencies on board. Then - again with a single touch - an infrared link provides Automatic Transmitter Setup, so even beginners can have a PGX Wireless up and running, interference-free, in no time.

To ensure outstanding wireless performance, all PGX systems feature Shure's patented, microprocessor-controlled Predictive Diversity reception and full frequency agility across a generous 18 MHz bandwidth. Preset frequency compatibility allows up to nine systems per band to operate simultaneously, with 12 systems easily attained by using multiple frequency bands.

All PGX Wireless systems are built to Shure's legendary standards of ruggedness and reliability, and comes with a padded carrying case included.

Shure PGX Specifications

System
• Working Range: 100m (300 ft.)
  Note: actual range depends on RF signal absorption, reflection, and interference
• Audio Frequency Response +/- 2 dB:
  • Minimum: 45 Hz
  • Maximum: 15 kHz
  (Overall system frequency depends on microphone element.)
• Total Harmonic Distortion Ref. +/- 33 kHz deviation, 1 kHz tone: 0.5%, typical
• Dynamic Range: >100 dB A-weighted
• Operating Temperature Range: -18°C (0°F) to +50°C (+122°F)
  Note: battery characteristics may limit this range
• Transmitter Audio Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output.

  PGX1 Bodypack Transmitter

• Audio Input Level:
  • -10 dBV maximum at "mic" gain position
  • +10 dBV maximum at 0dB gain position
  • +20 dBV maximum at -10dB gain position
• Gain Adjustment Range: 30 dB
• Input Impedance: 1 MOhm
• RF Transmitter Output: 30 mW maximum (dependent on applicable country regulations)
• Dimensions: 4.25" H x 2.50" W x 0.75: D (108 mm x 64 mm x 19 mm)
• Weight: 3 oz. (81 grams) without batteries
• Housing: Molded polycarbonate case
• Power Requirements: 2 "AA" size alkaline or rechargeable batteries
• Battery Life: >8 hours (alkaline)

  PGX2 Handheld Transmitter

• Audio Input Level:
  • +2 dBV maximum at -10dB position
  • -8 dBV maximum at 0dB position
• Gain Adjustment Range: 10dB
• RF Transmitter Output: 30 mW maximum (dependent on applicable country regulations)
• Dimensions (including SM58 cartridge): 10 x 2 inches in diameter (254 mm x 51 mm)
• Weight: 10.2 oz. (290 grams) without batteries
• Housing: Molded PC/ABS handle and battery cup
• Power Requirements: 2 "AA" size alkaline or rechargeable batteries
• Battery Life: >8 hours (alkaline)

  PGX4 Receiver

• Dimensions: 1.6 x 7.125 x 4.1 inches (40 mm x 181 mm x 104 mm)
• Weight: 11.5 oz. (327 g)
• Housing: ABS
• Audio Output Level (Ref. +/- 33 kHz deviation with 1 kHz tone)
  • XLR Connector (into 600 Ohm load): -19 dBV
  • 1/4 inch Connector (into 3000 Ohm load): -5 dBV
• Output Impedance:
  • XLR Connector: 200 Ohms
  • 1/4 inch Connector: 1kOhms
• XLR Output:
  • Impedance balanced
  • Pin 1: Ground (cable shield)
  • Pin 2: Audio
  • Pin 3: No Audio
• Sensitivity: -105 dBm for 12 dB SINAD, typical –Image Rejection: >70 dB, typical –Power Requirements: 12-18 Vdc at 150 mA, supplied by external power supply

   Manual 427 KB