|
|
|
|
|
Numark CM200 5 Channel Rack DJ Mixer with 3 Band EQ
Item #: NUM CM200
|
|
|
|
|
|
|
Product Description
|
Numark CM200 5 Channel Rack DJ Mixer with 3 Band EQ
The Numark CM200 is designed to be the perfect option for club and mobile applications, with outstanding performance and versatility. The CM200 is also one of the best values ever offered in a rack mixer. Features include 5 channels, DJ mic control, 10 line, 3 phono, and 3 mic inputs, master balanced XLR outputs with Record and Zone, steep 3-band EQ on every channel, EQ on mic channel, split or blend cueing, PFL gain adjust with meter, fader-start, panning on master fader, and a replaceable, assignable crossfader. The CM200 backs up its versatile feature set with outstanding performance specs, including THD rated at +0.01%/-0.03% (varies by configuration/application), S/N at 97dB, and Frequency Response from 20Hz to 20kHz (+/- 1dB). Features
- 5 Channels plus DJ Mic control
- Inputs: 10 line, 3 phono, 3 mic
- Master balanced XLR outputs with Record and Zone
- Steep 3-band EQ on every Channel
- EQ on mic channel
- Split or blend cueing, PFL gain adjust with meter
- Fader Start, panning on master fader
- Replaceable assignable crossfader
|
|
Item Specifications and Additional Product Information
|
Rear Panel Connections
Phono Inputs: This input is used for connecting your turntables through the sensitive RIAA phono preamplifiers. Only turntables with phono level output should be attached. Line level turntables must be attached to the line inputs.
GND: This screw connector should be used to secure any turntables or other devices connected to the mixer that need to be grounded.
Line Inputs: CD players, Tape Decks, Samplers or other line level input devices should be connected to these inputs.
Microphone Input: Microphones with a ¼” connector can be connected to these input
terminals.
Fader Start Connector: to attach your mixer to a remote start equipped Numark CD player using industry standard 1/8”(3.5mm) cables.
Record Output: This RCA output is for connecting a recording device such as a tape deck or CD recorder. The level of the record output is based upon pre-master levels.
Zone Output (RCA): This output is for connecting an external monitoring device such as a PA system, powered monitors or a home
stereo. The level of the zone stereo output signal is controlled by the zone fader.
Master Output (RCA): This output is for connecting an external monitoring device such as a PA system, powered monitors or a home stereo. The level of the master stereo output signal is controlled by the master fader.
Stereo Balanced Master Outputs (XLR): low impedance XLR type connectors controlled by the Master fader.
AC In
Voltage Selector: Set this to the correct voltage for your location standard.
Power Switch
|
|
|
|
Customers who bought this item also bought
|
|
| | | | | |