- Overview
- Specs
- Manufacturer Info
- Also Purchased
- Video & Docs
Recommended Accessories
ex VAT
inc VAT
ex VAT
inc VAT
Featuring two channels with independent 100 Hz crossovers; Peavey's IPR 1600 Power Amplifier offers a well cooled, lightweight alternative to those heavey amps you've been lugging around all these years. The IPR 1600 incorporates Peavey's exclusive DDT speaker protection with multi-point clip sampling leading a protection-circuitry suite that also includes DC, Temp, Signal and Active safeguards, all referenced on the front panel with LED indicators All this in a lightweight aluminum chassis.
Peavey's IPR 1600 Power Amplifier utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability and thermal efficiency. IPR Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available.
Peavey IPR 1600 Features
- DDT protection
- Revolutionary IPR class D topology
- Detented input controls
- Combination XLR-1/4 inch inputs
- Combination 1/4 inch-Speakon 4 pole outputs
- Individual signal pass-thru 1/4 inch jacks on each channel
- DSP-based Loudspeaker Management System
- 120 ms of and 4 bands of parametric equalization per channel
- Adjustable fourth-order Linkwitz-Riley Crossover
- Adjustable fourth-order high-pass filter each channel
- LED illuminated
- Security lock
- Setup wizard
- MAXX Bass
- Horn EQ each channel
- Blue, backlit LCD screen
- Light weight design
Peavey's IPR Power Amplifiers
Boasting a net weight as low as 7 lbs, the groundbreaking IPR Series utilizes an advanced design that allows our engineers to dramatically reduce weight while increasing output power, reliability and thermal efficiency. IPR Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. And all at a cost that shatters the old-guard paradigm of power-amp valuation.
Shaking up the pro audio industry with innovative power amplifier designs has become Peavey's trademark. More than 30 years ago, Peavey was the first to break the $1-per-watt barrier. Now with the Peavey IPR Series, they've pushed technological limits again to bring you an amazingly powerful and efficient power amp for just pennies per watt.
Peavey IPR 1600 Power Amplifier Specifications
- Rated Power: Both Channels (@ 1 kHz at <0.1% T.H.D.)
- 2 x 2 ohms: 800 watts per channel
- 2 x 4 ohms: 530 watts per channel
- 2 x 8 ohms: 300 watts per channel
- Rated Power: Single Channel (@ 1 kHz at <0.1% T.H.D.)
- 1 x 2 ohms: 1000 watts
- 1 x 4 ohms: 600 watts
- 1 x 8 ohms: 320 watts
- Minimum Load Impedance: 2 ohms
- Maximum RMS Voltage Swing: 55 volts
- Frequency Response: 10 Hz: 50 kHz; +0, -3 dB at 1 watt
- THD: per channel from 20 Hz to 20 kHz
- 2 x 2 ohms: <0.1% @ 600 watts (decreasing to 500 watts by 20 kHz at <0.25%)
- 2 x 4 ohms: <0.1% @ 470 watts
- 2 x 8 ohms: <0.1% @ 250 watts
- Input CMRR: > -60 dB @ 1 kHz
- Voltage Gain: x 60 (+35 dB)
- Crossover: 100 Hz
- switchable 2nd order High pass and 3rd order Low Pass per channel
- Crosstalk: > -70 dB @ 1 kHz at 100 watts power @ 4 ohms
- Hum and Noise: > -105 dB, A weighted referenced to rated power @ 4 ohms
- Damping Factor (8 ohms): > 170:1 @ 20 Hz: 1 kHz at 8 ohms
- Phase Response: +9 to: 86 degrees from 20 Hz to 20kHz
- Slew Rate: > 12V/us
- Input Sensitivity:
- .775 volts +/- 3% for 1 kHz 4 ohm rated power
- .68 volts +/- 3% for 1 kHz. 2 ohm rated power
- Input Impedance: 15k ohms, balanced and 7.5k ohms unbalanced.
- Current Draw @ 1/8 power:
- 550 watts @ 2 ohms
- 390 watts @ 4 ohms
- 250 watts @ 8 ohms
- Current Draw @ 1/3 power:
- 1,160 watts @ 2 ohms
- 810 watts @ 4 ohms
- 460 watts @ 8 ohms
- Cooling: Temperature dependent variable speed 80 mm DC fan
- Controls:
- 2 front panel attenuators
- Crossover select switch for H.P.F
- Normal and L.P.F.
- Indicator LEDs:
- 2 DDT (clip limiting)
- 2 Signal presence
- 2 Active status
- 2 Temp and 2 DC protect
- Protection:
- Thermal
- DC
- subsonic
- incorrect loads
- under and over voltage
- Connectors:
- Inputs: Dual Combi 1/4 inch XLR
- Outputs: Dual 1/4 inch signal patch, dual Speakon connectors
- Construction: 0.062 inch thick aluminum
- Dimensions: 3.5 x19 x 10.5 inches behind front panel + 0.6 inch for handle
- Weight: 7.125 lbs (3.23 kg)
- Warranty: 5 years
ex VAT
inc VAT
-
ex VAT
inc VAT
-
ex VAT
inc VAT
ex VAT
inc VAT
|
Minimum Item Quantity 1 is required to purchase.
Item Quantity exceeds the limit 0 . Questions? Feel free to Call or Chat.
|
|
- Overview
- Specs
- Manufacturer Info
- Also Purchased
- Video & Docs
|
|