- Overview
- Specs
- Manufacturer Info
- Also Purchased
- Video & Docs
Recommended Accessories
ex VAT
inc VAT
ex VAT
inc VAT
1500 watts of pure Peavey power, the IPR 3000 rocks this heavy wattage per channel at 2 ohms while being designed for transport weighing under 7 lbs. The IPR 3000 features a 2 channel independent fourth order Linkwitz-Riley crossover, a variable-speed fan housed in a lightweight aluminum chassis, Peavey’s patented DDT speaker protection and the revolutionary IPR class D topology.
Peavey IPR 3000 Features
- DDT protection
- Revolutionary IPR class D topology
- Detented input controls
- Combination XLR-1/4 inch inputs
- Combination 1/4 inch-Speakon 4 pole outputs
- Individual signal pass-thru 1/4 inch jacks on each channel
- DSP-based Loudspeaker Management System
- 120 ms of and 4 bands of parametric equalization per channel
- Adjustable fourth-order Linkwitz-Riley Crossover
- Adjustable fourth-order high-pass filter each channel
- LED illuminated
- Security lock
- Setup wizard
- MAXX Bass
- Horn EQ each channel
- Blue, backlit LCD screen
- Light weight design
Peavey's IPR Power Amplifiers
Boasting a net weight as low as 7 lbs, the groundbreaking IPR Series utilizes an advanced design that allows our engineers to dramatically reduce weight while increasing output power, reliability and thermal efficiency. IPR Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. And all at a cost that shatters the old-guard paradigm of power-amp valuation.
Shaking up the pro audio industry with innovative power amplifier designs has become Peavey's trademark. More than 30 years ago, Peavey was the first to break the $1-per-watt barrier. Now with the Peavey IPR Series, they've pushed technological limits again to bring you an amazingly powerful and efficient power amp for just pennies per watt.
Peavey IPR 3000 Lightweight Power Amplifier Specifications
- Rated Power (2 x 2 ohms) : 800 watts per channel at 1 kHz at less than 0.1 percent T.H.D. both channels driven.
- Rated Power (2 x 4 ohms) : 530 watts per channel at 1 kHz at less than 0.1 percent T.H.D. both channels driven.
- Rated Power (2 x 8 ohms) : 300 watts per channel at 1 kHz at less than 0.1 percent T.H.D. both channels driven.
- Rated Power (1 x 2 ohms) : 1000 watts at 1 kHz at at less than 0.1 percent T.H.D.
- Rated Power (1 x 4 ohms) : 600 watts at 1 kHz at less than 0.1 percent T.H.D.
- Rated Power (1 x 8 ohms) : 320 watts at 1 kHz at <0.1 percent T.H.D.
- Minimum Load Impedance : 2 ohms
- Maximum RMS Voltage Swing : 55 volts
- Frequency Response : 10 Hz - 50 kHz; +0, -3 dB at 1 watt
- T.H.D. (2 x 2 ohms) : <0.1 percent at 600 watts per channel from 20 Hz to 1.5 kHz, decreasing to 500 watts at 20 kHz at <0.25%
- T.H.D. (2 x 4 ohms) : <0.1 percent at 470 watts per channel from 20 Hz to 20 kHz
- T.H.D. (2 x 8 ohms) : <0.1 percent at 250 watts per channel from 20 Hz to 20 kHz
- Input CMRR : > - 60 dB at 1 kHz
- Voltage Gain : x 60 (+35 dB)
- Crossover : 100 Hz switchable 2nd order High pass and 3rd order Low Pass per channel
- Crosstalk : > -70 dB at 1 kHz at 100 watts power at 4 ohms
- Hum and Noise : > -105 dB, 'A' weighted referenced to rated power at 4 ohms
- Damping Factor (8 ohms) : > 170:1 at 20 Hz - 1 kHz at 8 ohms
- Phase Response : +9 to - 86 degrees from 20 Hz to 20kHz
- Slew Rate: Less than 12V/us
- Input Sensitivity : .775 volts +/- 3 percent for 1 kHz 4 ohm rated power, .68 volts +/- 3 percent for 1 kHz. 2 ohm rated power
- Input Impedance : 15k ohms, balanced and 7.5k ohms unbalanced.
- Current Draw at 1/8 power : 550 watts at 2 ohms, 390 watts at 4 ohms, 250 watts at 8 ohms
- Current Draw at 1/3 power :1,160 watts at 2 ohms, 810 watts at 4 ohms, 460 watts at 8 ohms
- Cooling : Temperature dependent variable speed 80 mm DC fan
- Controls : 2 front panel attenuators, crossover select switch for H.P.F, Normal and L.P.F.
- Indicator LEDs : 2 DDT (clip limiting), 2 Signal presence, 2 Active status, 2 Temp and 2 DC protect
- Protection : Thermal, DC, subsonic, incorrect loads, under and over voltage
- Connectors : Inputs: Dual Combi 1/4 in. XLR, Outputs: Dual 1/4 in. signal patch, dual Speakon connectors
- Construction : 0.062 in. thick aluminum
- Dimensions : 3.5 in.x19 in. x 10.5 in. behind front panel + 0.6 in. for handle
- Net Weight* : 3.23 kg (7.125 lbs.)
- Gross Weight : 4.31 kg (9.5 lbs.)
- Warranty: 5 years
|
Minimum Item Quantity 1 is required to purchase.
Item Quantity exceeds the limit 0 . Questions? Feel free to Call or Chat.
|
|
- Overview
- Specs
- Manufacturer Info
- Also Purchased
- Video & Docs
|
|