Peavey
Peavey SP2 PA Speaker
Collapse 
Peavey SP2 PA Speaker

Peavey SP2 PA Speaker; Clear quality sound reinforcement for your PA.
The SP2 enclosures are another step in a long line of reliable Peavey enclosures engineered for optimal sound reproduction. Peavey's SP2 features their patented asymmetrical Quadratic Throat Waveguide technology that pushes the sound at an angle that will best reach the ears of the audience with the pristine, precise sound that the SP2 has to offer. Using famed Black Widow loudspeakers with Kevlar-impregnated cones, 4 inch ribbon-wire voice coils and exclusive field-replaceable baskets; the patented Radialinear Planar Phase Correction System; and titanium compression drivers with ferrofluid cooling.

Peavey SP2 Features
  • 2-way full-range, bi-ampable sound reinforcement system
  • RX22 compression driver with ferrofluid cooling
  • 15 inch BWX Black Widow 4 inch voice coil woofer
  • 1000 watts program, 2000 watts peak
  • 54 Hz to 17 kHz
  • Patented Asymmetrical Quadratic Throat Waveguide technology
  • Asymmetrical horn directs sound to your audience, not over their heads
  • Patented Radialinear Planar Phase Correction System
  • Sound Guard III tweeter protection
  • Neutrik Speakon 4 pin jack and two 1/4 inch inputs
  • Bi-amp input via 4-pin switching Neutrik Speakon
  • Trapezoidal enclosure
  • Hammertex durable covering material
  • Stand-mount adapter
Peavey SP Series enclosures have been a live sound standard for more than three decades and are ideal for all styles music. While they've earned their reputation for dependability by logging in countless hours in live music clubs and other performance venues, SP Series enclosures are equally effective for pre-recorded audio and multi-purpose use. With this radical update, Peavey has made its much-lauded SP Series even louder, lighter and clearer than ever.
Collapse 
Peavey SP2 PA Speaker
  • Frequency response: 1 meter on-axis swept-sine in anechoic environment
    • 54 Hz to 17 kHz (±3 dB)
  • Usable low frequency limit: 44 Hz (-10 dB point)
  • Full range Power handling:
    • Continuous: 500 Watts
    • Program: 1,000 Watts
    • Peak: 2,000 Watts
  • Low frequency Power handling:
    • Continuous: 500 Watts
    • Program: 1,000 Watts
    • Peak: 2,000 Watts
  • High frequency Power handling:
    • Continuous: 60 Watts
    • Program: 120 Watts
    • Peak: 240 Watts
  • Sound pressure level: 1 Watt, 1 meter in anechoic environment
    • Full range: 98.0 dB SPL (2.83 V input)
    • Low frequency: 99 dB SPL (2.83 V input)
    • Mid/high frequency: 110 dB SPL (2.83 V input)
  • Maximum sound pressure level: (1 meter)
    • Full range: 125 dB SPL continuous (131 peak)
    • Low frequency section: 126 dB SPL continuous (132 peak)
    • High frequency section: 129 dB SPL continuous (135 peak)
  • Radiation angle measured at -6 dB point of polar response:
    • 90 degrees horizontal by 40 degrees vertical
    • Vertical main polar lobe is angled down 10 degrees
    • Straight ahead being +10, -30 degrees
  • Transducer complement:
    • Low frequency: 1x 15 inch woofer, vented 1508-8 HE SF
    • High frequency: 1x .875 inch exit (51 mm voice coil)
    • RX 22 compression driver on an asymmetrical Quadratic Throat CD horn
  • Box tuning frequency:
    • Low Frequency Section: 55 Hz
    • Crossover frequency (internal passive): 1800 Hz (Low-High)
  • Recommended Active Crossover Frequency Region and Slope:
    • Low Frequency – High Frequency: 1,800 Hz at 12 dB/octave
  • Time Offset:
    • Low frequency: 0.0 ms
    • Mid/high frequency: 0.48 ms
  • Impedance (Z):
    • Full Range: Nominal: 8.0 ohms (Minimum: 6.0 ohms)
    • Low Frequency: Nominal: 8.0 ohms (Minimum: 6.9 ohms)
    • Passive HF: Nominal: 8.0 ohms (Minimum: 5.4 ohms)
  • Input connections: Full Range
    • Two 1/4 inch phone jacks
    • One Neutrik four-pin Speakon jack
    • Bi-amp capability provided via an internal wiring jumper
  • Enclosure materials: Aspen hardwood plywood
  • Enclosure Finish: Hammertex covering
  • Mounting provisions:
    • Built-in SA-1 stand-mount adapter
    • Four large rubber feet on bottom for floor use
    • Not designed for overhead suspension
  • Dimensions: (H x W x D)
    • Front: 30.75 x 20.56 x 23 inches (781 x 522 x 584 mm)
    • Rear: 30.75 x 12.5 x 23 inches (781 x 314 x 584 mm)
  • Net Weight: 71 lbs (32.3 kg)


Collapse 

 
 

FREE 12 month Extended WarrantyBuy it on EZ Payments!
 

 
Quantity:
Add to Cart
Add to Wish List  
 

 
Rate and Review this Product:      Rate It
11 people rated this item
ED LEWIS
Overall Ranking:
Ease of Use:
Features:
Quality:
Sound:
Value:
Subject:
Loading....