|
|
Model Options:
1 Review (s) - 3 Rating (s)
QSC HPR122i Powered PA/Stage MonitorThe QSC HPR122i offers performers and audio professionals the power, technology and legendary reliability of QSC amplification combined with the simplicity and convenience of a multipurpose powered loudspeaker system.
Whether your application is vocal reinforcement, dance music, or full tilt rock and roll and whether your need is main PA, or stage monitor, suspended or pole mounted, the HPR122i is your solution. With 131 dB of maximum output the HPR122i outperforms molded plastic box systems without significant additional weight or cost. A 12-inch low-frequency woofer with 3-inch voice coil is powered by 400 watts of class H power. A neodymium magnet design provides ample motor strength for low end performance without adding unnecessary weight. The 1.4-inch diaphragm neodymium compression driver is powered by a 100 watt, class AB+B amplifier and is loaded on a 75º conical horn. It’s the same high-frequency driver you’ll find on the HPR153F 3-way loudspeaker system.
QSC HPR122i Features
- Ideally suited for use as main PA or monitor
- High continuous power: 500 watts total amplifier power
- 75º conical horn provides predictable coverage regardless of cabinet orientation
- Nine (9) M10 suspension points allow for multiple suspended applications
QSC HPR122i Specifications
Configuration
- 12-inch 2-way multipurpose powered loudspeaker
Transducers
- Low Frequency: 12-inch neodymium transducer with 3-inch voice coil
- High Frequency: 1.4-inch diaphragm compression driver
Performance
- Frequency Response (-3 dB): 1 62 Hz - 18 kHz
- Frequency Range (-10 dB): 1 53 Hz - 22 kHz
- Nominal Coverage (-6 dB): 75° conical
- Maximum SPL (1 meter): 131 dB peak
Amplifier
- Power Output:
- 400W LF Class H
- 100W HF Class AB+B
- Input Impedance:
- 22kOhms balanced
- 11kOhms unbalanced
- Controls:
- Gain
- Low-cut filter (Main / Monitor)
- Front LED On/Off
- Power
- Circuit breaker
- Indicators:
- Cooling: Convection
- Amplifier Protection:
- Thermal and output power limiting
- Output short circuit
- Overtemperature muting
- Driver DC protection
- Current Consumption at 120 VAC (1/8 power EIA noise): 1.5A
Physical
- Enclosure: Painted Birch plywood
- Finish: Black textured paint
- Grille: Powder coated 16 gauge steel
- Suspension/Attachment Points: 9 M10 rigging locations
- Connectors:
- Balanced female XLR line level input
- Balanced male XLR full range line level out
- Dimensions: 26.9 H x 14.7 W x 14.9 inches D (683 x 373 x 379 mm)
- Net Weight: 60 lbs (27.2 kg)
1 Measured in half-space.
Specifications subject to change without notice.
Recommended Accessories for:
|
Minimum Item Quantity 1 is required to purchase. Item Quantity exceeds the limit -1 . Questions? Feel free to Call or Chat.
Rate and Review this Product:
 3 people rated this item Michael from Austin, Tx, USA Overall Ranking:
|
|
|
|
|
|