 |
 |
 |
 |
 |
 |
 |
|
|
| Call Us 24/7 At: 1-800-458-4076 |
|
|
|
|
|
|
|
|
|
|
|
|
|  | | Rane |
Rane TTM57SL Specifications
Two Input Buses
- PGM 1 selects: Analog 1, Analog 2, Digital 1, Digital 2
- PGM 2 selects: Analog 3, Analog 4, Digital 1, Digital 2
- All analog inputs are phono or line capable
- Input Gain and Left/Right Pan controls
- 3-band, full cut Tone controls with Kill switches
Magnetic faders for Channel Faders and Crossfader
- Non-contact magnetic position sensor technology. No travel noise - No bleed - Ever!
- Independent Contour and Reverse controls
Microphone Input with Engage switch, Level control and 2-band Tone control
- Three sets of Outputs, each with independent Level controls
- Main Out on XLR (balanced)
- Booth Out on 1/4 inch TRS (balanced)
- Auxiliary Out on RCA (unbalanced)
Internal LFO Filter and Echo Effects with six possible insert points
- Assign Program 1, Program 2 or Both to external FlexFx loop
- Pre- or Post-channel faders for Program 1 and Program 2
- Main Mix
- Auxiliary Input Bus
Headphone Cue Monitor includes Cue Pan, Main Mix select and Level
- 8 Channels of Streaming Audio
- 16 bit / 44.1 kHz Streaming Audio
- Four channels from computer
- Stereo source Digital 1 and Digital 2
- Four channels to computer
- Stereo Record 1 and Record 2
Stereo Recording
- Record 1 and Record 2 may record:
- Pre- or Post-channel faders for Program 1 or Program 2
- Main Mix
- Auxiliary Input Bus
Vinyl / CD Control Inputs
- Stereo Record 1 may be used for 4-channels of control
- Select Analog 1 or Analog 2 for Control Input 1
- Select Analog 3 or Analog 4 for Control Input 2
Additional soft mixer controls used by Scratch LIVE & internal effects
- Foot switch input (Inputs on Tip and Ring; foot switch not included)
- Deck 1-2 switch
- Group switch
- B1 - B6 programmable switches
- P1 - P2 programmable Encoders with push switches
- J1 - J2 programmable Joysticks with push switches
- USB firmware updates
- Internal universal switching power supply (100-230 VAC)
- Unit size: 13.5 inches H x 10 inches W x 4 inches D (34.3 cm x 25.4 cm x 10.2 cm)
- Weight: 8.5 lb (3.8 kg)
Serato Scratch LIVE Minimum System Requirements
Mac
- 800 MHz G4
- OSX 10.3
- 512M RAM
PC
- 1 GHz Processor
- Windows XP with Service Pack 2
- 512M RAM
Downloadable 1.7.2 version of Scratch LIVE includes
support for the Microsoft Vista operating system.
Intel Macs must use Scratch LIVE version 1.5 or higher
downloadable from the Scratch LIVE forum.
|
|
| Price Match Plus
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|