RODE D-PowerPlug Inline Cable Mounted Amplifier    Item #: ROD DPOWERPLUG 

The RODE D-PowerPlug is effectively a Turbo Charger for Dynamic microphones!

The D-PowerPlug features an instrumentation grade pre-amplifier circuit and will turn any standard dynamic microphone into a high level electronically balanced output device.

Using conventional microphones with long multi-core cables results in a dramatic loss of signal strength, and of course sound quality due to cable resistance and capacitance. Powered by standard P48 V, D-PowerPlug can drive cables in excess of 100 m with negligible loss of signal quality or power.

Compatible with standard XLR connectors.

RODE D-PowerPlug Features

• Instrumentation grade pre-amplifier.
• Balanced input and balanced output.
• Can be used with long cable runs with minimum losses.
• P48V phantom powered.

• Gain: +20 dB
• Input Level (nominal): 1 mV
• Output Level (nominal): 10 mV
• Frequency Response: 20 Hz ~ 20 kHz (-3 dB)
• Input impedance: 100 kOhms balanced per arm
• Output Impedence: 100 Ohms balanced
• Noise: -116 dB A-Wt RTI
• Maximum Input: 0.8 Vp-p
• Maximum Output: + 11.4 dBu @ 1% THD (8 Vp-p)
• Input Connector: XLR 3 PIN Female
• Output Connector: XLR 3 PIN Male
• Pin Assignment: Pin 1 GND, Pin 2 Signal(+), Pin 3 Signal(-)
• Current Consumption: 3 mA @ 48V
• Weight Approx.: 73.8 grm
• Dimensions:
• Diameter: 19 mm (.75 inch)
• Length: 94 mm (3.7 inches)

   Manual 148 KB