Sennheiser Evolution G3 100 UHF Wireless Headset Mic System

Sennheiser Evolution G3 100 System Specifications

• Modulation: Broadband FM
• Frequency Ranges (MHz):
  516 - 558 (A)
  566 - 608 (G)
  626 - 668 (B)
• Switching bandwidth: 42 MHz
• Frequency Banks:
  20 (fixed)
  1 (rewritable)
• Maximum # or presets per bank: 12
• Pilot tone squelch: as ew G2, switchable
• Compander: HDX, compatible with ew G2 and ew G1

Sennheiser Evolution G3 100 Receiver Specifications

• Principle: True Diversity
• Sensitivity (52dBAeff S/N: < 2.5 µV
• Adjacent channel rejection: greater than or equal to 65 dB
• Intermodulation rejection: greater than or equal to 65 dB
• Blocking: greater than or equal to 70 dB
• Squelch:
  Lo: 5 dBµV
  MID: 15 dBµV
  Hi: 25 dBµV
• Antenna inputs: 2 x BNC / 50 ohms
• S/N: greater than or equal to 110 dB
• AF Frequency response: 80-18,000 Hz
• AF outputs:
  1/4 inch jack: +12 dBu (unbal.)
  XLR: +18 dBu + 6 dB gain (bal.)
• AF gain range: 48 dB (3 dB steps)
• EQ presets:
  Flat
  LoCut (-3 dB / 180 Hz)
  HiBoost (+6 dB / 10 kHz)
  LoCut/HiBoost
• Temperature Range: -10°C - +55°C
• Power Supply: NT 2-3
• Nominal voltage: 12 V DC
• Current comsumption: 300 mA
• Operation time (batteries, BA2015 accupack): typically 8 hrs
• Dimensions (BxHxT): 212 x 43 x 190mm
• Weight: approximately 900 grams

Sennheiser Evolution G3 100 Bodypack Transmitter Specifications

• RF Output power: 30 mW
• Antenna output: whip antenna (SK)
• AF frequency response: 25 - 18,000 Hz
• AF Sensitivity range: 60 dB / 3 dB steps
• THD: less than or equal to 0.9 per cent
• Maximum input voltage: +12 dBu
• Input impedance: 1 M ohms
• Input capacity: 4 steps, switchable
• Temperature range: -10°C - +55°C
• Power Supply: 2 x AA batteries, 1.5V
• Nominal Voltage: 2.4 V DC
• Current Consumption: typically 180 mA (30 mW)
• Operation time (batteries/BA2015): typically 8 hours
• Dimensions: 82 x 64 x 24 mm
• Weight (including batteries): approximately 160 grams

Consumer Alert!
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones

Note:All of the wireless systems that AMS sells comply with the FCC guidelines and regulations.We are presenting this information as a matter of legally required disclosure.