Sennheiser Evolution G3 100 System Specifications
- Modulation: Broadband FM
- Frequency Ranges (MHz):
516 - 558 (A)
566 - 608 (G)
626 - 668 (B)
- Switching bandwidth: 42 MHz
- Frequency Banks:
20 (fixed)
1 (rewritable)
- Maximum # or presets per bank: 12
- Pilot tone squelch: as ew G2, switchable
- Compander: HDX, compatible with ew G2 and ew G1
Sennheiser Evolution G3 100 Receiver Specifications
- Principle: True Diversity
- Sensitivity (52dBAeff S/N: < 2.5 µV
- Adjacent channel rejection: greater than or equal to 65 dB
- Intermodulation rejection: greater than or equal to 65 dB
- Blocking: greater than or equal to 70 dB
- Squelch:
Lo: 5 dBµV
MID: 15 dBµV
Hi: 25 dBµV
- Antenna inputs: 2 x BNC / 50 ohms
- S/N: greater than or equal to 110 dB
- AF Frequency response: 80-18,000 Hz
- AF outputs:
1/4 inch jack: +12 dBu (unbal.)
XLR: +18 dBu + 6 dB gain (bal.)
- AF gain range: 48 dB (3 dB steps)
- EQ presets:
Flat
LoCut (-3 dB / 180 Hz)
HiBoost (+6 dB / 10 kHz)
LoCut/HiBoost
- Temperature Range: -10°C - +55°C
- Power Supply: NT 2-3
- Nominal voltage: 12 V DC
- Current comsumption: 300 mA
- Operation time (batteries, BA2015 accupack): typically 8 hrs
- Dimensions (BxHxT): 212 x 43 x 190mm
- Weight: approximately 900 grams
Sennheiser Evolution G3 100 Transmitter Specifications
- RF Output power: 30 mW
- Antenna output: short antenna (SK)
- AF frequency response: 80 - 18,000 Hz
- AF Sensitivity range: 48 dB / 6 dB steps
- THD: less than or equal to 0.9 per cent
- Maximum input voltage: +12 dBu
- Input impedance: 1 M ohms
- Input capacity: 4 steps, switchable
- Temperature range: -10°C - +55°C
- Power Supply: 2 x AA batteries, 1.5V
- Nominal Voltage: 2.4 V DC
- Current Consumption: typically 180 mA (30 mW)
- Operation time (batteries/BA2015): typically 8 hours
- Dimensions: 50 x 265 mm
- Weight (including batteries): approximately 450 grams
Consumer Alert!Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones
Note:All of the wireless systems that AMS sells comply with the FCC guidelines and regulations
.We are presenting this information as a matter of legally required disclosure.