- Overview
- Specs
- Manufacturer Info
- Also Purchased
- Video & Docs
Recommended Accessories
ex VAT
inc VAT
ex VAT
inc VAT
ex VAT
inc VAT
ex VAT
inc VAT
The Shure MX392C Microflex Cardiod Condenser Boundary Microphone is a surface mount mic equipped with programmable, silent membrane switches, logic inputs and outputs, green LED indicators, and features interchangeable condenser cartridges. The MX392C is the high-quality solution for a range of applications such as altars, boardrooms and distance learning centers.
Shure MX392C Microflex Cardiod Condenser Boundary Microphone Features
- Flat frequency response across the vocal range for uncolored sound
- Interchangeable cardioid, supercardioid, and omnidirectional cartridges that provide optimal choice for each application
- Sleek, low-profile design for unobtrusive appearance
- Balanced, transformerless output for increased immunity to noise over long cable runs
- Programmable membrane on/off switch plus LED on/off indicator
- LED logic input and switch logic output terminals for remote control or use with automatic mixers
Shure MX392C Microflex Cardioid Condenser Boundary Microphone Specifications
Frequency Response: 50 to 17,000 Hz
Polar Pattern: Cardioid
Output Impedance: EIA Rated at 150 ohms (180 ohms actual)
Sensitivity (at 1 kHz, open circuit voltage): -27.5 dBV/Pa (42.2 mV)
Maximum Sound Pressure Level (1 kHz at 1% Total Harmonic Distortion, 1 k ohm load): 117.0 dB
Signal to Noise Ratio (referenced at 94 dB SPL): 71.0 dB
Equivalent Output Noise (A-weighted): 23.0 dB SPL
Dynamic Range: 94.0 dB
Common Mode Rejection: 45 dB minimum, 10 Hz to 100 kHz
Switch Attenuation: 50 dB minimum
Preamplifier Output Clipping Level: -6 dBV (0.5 V)
Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector
Logic Connections:
- LED IN: Active low (<1.0v), TTL compatible. Absolute maximum voltage: -0.7V to 50V
- SWITCH OUT: Active low (<0.5V), sinks up to 20mA, TTL compatible. Absolute maximum voltage: -0.7V to 24V (up to 50V through 3 k ohms)
Power Requirements: 11 to 52 Vdc phantom / 2.0 mA current consumption
Operating Temperature Range: -18 to 57 degrees C (0 to 135 degrees F)
Relative Humidity: 0 to 95%
|
MSRP: ex VAT
inc VAT
Minimum Item Quantity 1 is required to purchase.
Item Quantity exceeds the limit 0 . Questions? Feel free to Call or Chat.
|
|
- Overview
- Specs
- Manufacturer Info
- Also Purchased
- Video & Docs
|
|