American Musical Supply
Call Us 24/7 At: 1-800-458-4076   
Edge Login  New User? Register Here Edge
Add $49.95 to your cart for
FREE Shipping*
Edge Item: 0  Cart Total: $0.00
Edge
Top Brands
Akai | Alesis | Behringer | Epiphone | Fender | Gibson |
Ibanez | JBL | Korg | Line 6 | See All Brands |
Edge
Quick Order  Catalog Quick Order
Forum  AMS FORUM
Edge

   

 
Shure SLX UHF Lapel Wireless Microphone System with WL185 Mic
Model Options:  
Collapse 
Shure SLX UHF Lapel Wireless Microphone System with WL185 Mic

SLX wireless delivers superior audio quality in an easy-to-use and quickly configurable package. Offering Shure's patented Audio Reference Companding technology for more transmission clarity and dynamic range, along with an innovative setup complete with automatic synchronization, SLX supports up to 20 compatible systems, and setup is nearly effortless. SLX's Auto Frequency Selection and Auto Transmitter Setup scans the wireless landscape and identifies a clear channel instantly. Then, guided by an infrared link, at the touch of a button the transmitter automatically syncs with the receiver. With over 960 operating frequencies across 24 MHz of UHF bandwidth, you should be able to quickly and easily set up up to 20 systems (area dependent). These diversity systems feature metal receivers, rack hardware, detachable antennas, a backlit multifunction LCD display, 1/4-inch and XLR outputs, frequency and power lockouts, an In Line power supply, and a rear-panel volume control. The transmitters feature a timed backlit LCD, frequency and power lockouts, 300 ft. (100m) of operating range, and 8-hour operation on two AA batteries. Includes WL185 Lavalier Microphone, SLX1 Bodypack Transmitter, and SLX4 Diversity Receiver.

Multiple wireless units? Leading the industry again, AMS lets you choose your wireless frequency!

    Channels
  • Channel H5
  • Channel J3
  • Channel L4

Features
  • Shure’s patented Audio
  • Reference Companding: Delivers crystal-clear audio transmission, far superior to conventional wireless technology
  • Auto Frequency Selection: Locates a clear channel instantly
  • Auto Transmitter Setup: Infrared link automatically syncs the transmitter and receiver
    Wireless Receiver
  • Detachable 1/4 wave antennas
  • Backlit LCD
  • Rack-mount hardware included
  • 1/4" and XLR audio outputs
  • Frequency and power lockout
  • Volume control on rear of unit
  • Rugged metal construction


    Handheld or Bodypack Transmitter
  • Choice of Shure handheld microphones
  • Bodypack works with headworn, lavalier and instrument microphones and cables
  • Timed backlit LCD
  • Frequency and power lockout
  • 2 AA batteries (included) provide 8 hours of continuous use
  • 100m (300 ft.) operating range


Audio Reference Companding
Shure's patented Audio Reference Companding is currently featured in SLX and ULX Wireless Systems, and in some PSM 700 Personal Monitor Systems (H3 and L2 bands).

Audio Reference Companding: The Basics

    What does it do?
    Improves wireless sound quality.

    What is it?
    A more efficient companding scheme.

    What is companding?
    Companding is the process of compressing the audio signal prior to transmission and expanding it after reception. All pro audio wireless needs companding to deliver a wide dynamic range (greater than 100dB).

    How does it work?
    Audio Reference Companding is a level-dependent companding scheme. Instead of companding across the entire dynamic range like most wireless systems (causing a whooshing audio artifact known as "breathing"), companding only occurs at high audio levels. These levels are high enough to make the companding artifacts inaudible.

    Why is it better?
    Sounds more like a wired microphone, with less noise and greater dynamic range than other wireless systems. No artifacts, lower noise floor, clearer sound at all audio levels.


Audio Reference Companding: Tangible Results
Specific attributes of Audio Reference Companding that the listener will notice are:

  • No "breathing" noise
  • Lower noise floor
  • More headroom - won't clip as easily
  • Clearer sound at all audio levels
  • Sounds more like a wired mic, as clearly demonstrated by published impulse response curves.
Collapse 

Specifications

  • Operating Range Under Typical Conditions: 100m (300 ft.)
    Note: actual range depends on RF signal absorption, reflection, and interference
  • Audio Frequency Response (+/– 2 dB):
    • Minimum: 45 Hz
    • Maximum: 15 kHz
  • Total Harmonic Distortion (ref. +/– 38 kHz deviation, 1 kHz tone): 0.5%, typical
  • Signal-to-Noise Ratio: >100 dB A-weighted
  • Operating Temperature Range: –18°C (0°F) to +50°C (+122°F)
    Note: battery characteristics may limit this range
  • Transmitter Audio Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output.
    SLX1 Bodypack Transmitter
  • Audio Input Level: +10 dBV maximum at 0 dB gain position
  • Dimensions: 4.25 x 2.50 x 0.75 in. (108 mm H x 64 mm W x 19 mm D)
  • Weight: 3 oz. (81 grams) without batteries
  • Housing: Molded ABS case
  • Power: 2 “AA” size alkaline or rechargeable batteries
  • Battery Life: >8 hours (alkaline)
    SLX2 Handheld Transmitter
  • Audio Input Level: +2 dBV maximum at minimum gain position
  • Dimensions (including SM58 cartridge): 10 x 2 inches (254 mm x 51 mm dia.)
  • Weight: 10.2 oz. (290 grams) without batteries
  • Housing: Molded PC/ABS handle and battery cup
  • Power: 2 “AA” size alkaline or rechargeable batteries
  • Battery Life: >8 hours (alkaline)
    SLX4 Receiver
  • Dimensions: 1.65 x 7.76 x 5.28 inches (42 mm H x 197 mm W x 134 mm D)
  • Weight: 1 lb. 13 oz. (816 g)
  • Housing: Galvanized steel
  • Audio Output Level (ref. +/– 38 kHz deviation with 1 kHz tone):
    • XLR connector (into 600 ohm load): –13 dBV
    • 1/4 inch connector (into 3000 ohm load): –2 dBV
  • Output Impedance:
    • XLR connector: 200 ohms
    • 1/4 inch connector: 1kohm
  • XLR output: Impedance balanced
    Pin 1: Ground
    Pin 2: (+)
    Pin 3: (-)
  • Sensitivity: –105 dBm for 12 dB SINAD, typical
  • Image Rejection: >70 dB, typical
  • Power: 12-18 Vdc at 150 mA, supplied by external power supply

 
Expand 
   
 
Guaranteed Lowest Price

 
Gold Protection Extended WarrantyFree ShippingAvailable for EZ Pay Billing
 
   
 
Guaranteed Lowest Price

 
Gold Protection Extended WarrantyFree ShippingAvailable for EZ Pay Billing
 
   
 
Guaranteed Lowest Price

 
Gold Protection Extended WarrantyFree ShippingAvailable for EZ Pay Billing
"Love your Return Policy and your Extended Warranty. Your Customer Service is excellent too. Products always arrive as advertised, in new condition. Will ALWAYS make my purchases with you guys."