How to use your revolutionary Stanton VC1 Vinyl Cleaner Kit
Recommended times to clean you record:
•When you get "pop" and "crackles," indicating the presence of debris.
•Whenever a record is found to be noticeably dirty.
•Often enough to keep micro dust from becoming visible to the naked eye.
•Very dirty records may require a repeat of the cleaning procedure for best results.
1). Place the record on a flat, clean lint free surface.
2). Sweep both sides of the record with the dry brush direction of arrows on handle.
3). Shake the bottle of fluid well before using. Open the dropper cap and apply three to four drops of VC-1 fluid along the edge of the brush pad.
4).Sweep this damp edge of the pad along the record grooves in the direction of the arrows to clean the grooves of dust and dirt particles.
5). Then sweep the record grooves with a dry portion of the brush in the direction of the arrows until the surface of the record is dry and clean.
•To ensure proper results, continue to sweep record surface after it is dry to insure removal of all debris and fingerprints.
•Remember not to use excessive fluid when cleaning your record. When cleaning several records blot excess fluid from the applicator brush with a paper towel.
•VC-1 Vinyl Cleaner is safe for use on old 78RPM records.