Studio Projects B3 v2 Condenser MicrophoneThe Studio Projects B3 v2 Condenser Microphone is simply the ultimate large diaphragm mic in this price range. The B3 v2 has all the technical refinements to be an enduring classic. With features you would expect in a world class microphone, the B3 offers three recording pattern positions (cardioid, omni and a true figure eight) with pad and Hi-Pass filter. Equipped with a true 1-inch, 3-micron gold sputtered dual gold large diaphragm in a pressure gradient transducer capsule, the B3 will ensure the finest quality of recordings while offering linear response and a classic deep rich sound. The B3 can be connected to any external microphone preamplifier or mixing console which provides 48 volt phantom power or via any 48 volt external power supply. The B3 will compete favorably with microphones costing substantially more. If your looking for that traditional
German sounding pedigree for your studio, but simply can't or won't spend the big dollars it takes to get it, then the Studio Projects B3 it the microphone for you.
Studio Projects B3 v2 Applications
- A superb vocal microphone with warm transparent character
- Great for overhead choirs, strings, pianos & percussion
- Great for production, broadcast, and voice over work
- Perfect for the professional and home project studio
- A quality vocal mic suitable for all vocal styles
Studio Projects B3 v2 Features
- Pressure-Gradient Transducer, Dual 1-inch, 3-micron mylar capsule
- Selectable patterns (omni, cardioid, figure eight)
- High Pass Filter
- 10db Pad
Included Accessories
- Zippered Bag
- Foam Wind Screen
- Shockmount
Studio Projects B3 v2 Specifications
- Type: 1 inch large dual diaphragm 3 micron FET condenser microphone
- Polar Pattern: Cardioid/ Omni-directional/figure 8
- Frequency Response: 20~20,000 Hz
- Sensitivity: 14, 16, 18mV/Pa (Omni, Cardioid, Figure 8) (-37, -36, -35dB @1000Hz)
- Output Impedance: <200 Ohm
- Load Impedance: >1000 Ohm
- Maximum SPL: 132/142dB SPL for 1% THD @1000Hz(0dB/-10dB pad, 0dB SPL=0.00002Pa)
- Noise Level: 14dB-A (Cardioid)
- S/N:80 dB
- Power Requirement: 48 +/- 4V
- Current Consumption: <2.5mA
- Circuit: Transformerless circuit, featuring extremely low self noise and large dynamic range.
- Connector: Gold-plated 3-pin XLR
- Pad: -10dB
- Low Cut : 6dB/Octave at 150 Hz.
- Size:
- Diameter: 2.1 inches
- Length: 8.9 inches