The MOTU 828mk3 Hybrid connects via FireWire or hi-speed USB2 to a Mac or PC computer and delivers 28 audio inputs and 30 outputs with on-board effects and mixing. Apply hardware-based effects to all 28 inputs and 30 outputs via an on-board DSP-driven 8 stereo bus digital mixer with 32-bit floating point precision. 828mk3 Hybrid's effects include Classic Reverb with tail lengths up to 60 seconds, 7-band parametric EQ modeled after British analog consoles, and vintage compression (automatic gain control) modeled after the legendary LA-2A optical leveling amplifier. Effects can even be applied when the 828mk3 is operating stand-alone (without a computer) as a complete rack-mounted mixer.
Connect a wide variety of studio gear to the 828mk3 Hybrid, including microphones, guitars, synths, keyboards, drum machines and even effects processors via 8 balanced TRS analog in/out, two banks of optical (ADAT and TOSLink formats) and S/PDIF digital I/O. Monitor everything via XLR main outs, surround output and two front-panel phone jacks with independent volume control. Two front-panel mic/guitar combo inputs are equipped with transparent preamps, digitally controlled trim with plenty of gain, XLR mic input, true high-impedance guitar input, individual 48V phantom power switch, 20 dB pad, and V-Limit, a hardware limiter that helps prevent digital clipping from overloaded input signals as high as +12 dB above zero with no distortion. Additional protection can be applied with Soft Clip.
All 828mk3 analog inputs are equipped with digitally controlled analog trim controls that allow adjustments in precise 1 dB increments. The mic/guitar input trims can be adjusted using front-panel digital rotary encoders that provide feedback in the front panel LCD, while all quarter-inch TRS inputs can be trimmed from the included cross-platform CueMix FX software. Different trim configurations can be saved as files on disk for instant recall.MOTU 828mk3 Hybrid USB/Firewire Audio Interface