All 920D Custom products are highlighted with our signature orange wire. Gavitt Wire, a leading producer of premium guitar wire, has agreed to custom manufacture our signature cloth covered pushback wire, and we believe it is the perfect choice for hotrodding your guitar. The wire is built with an outer waxed cotton layer and an inner Celanese braid that provides impressive ruggedness while still maintaining a 22 gauge thickness. Limiting the amount of wire on each build compliments your choice of pickups by creating the perfect balance between capacitance and resistance.
920D Custom 450G Series Potentiometers
920D Custom potentiometers are used in this build. Our pots are manufactured by CTS to our exact specifications and are metered for accuracy before being used in any 920D Custom gear.
We specify a 10% audio taper, accompanied with a low rotational torque rating of 0.50-2.00 in.oz (compared to the industry standard 0.75-6.00 in.oz rating) to provide a buttery knob sweep.
We hold potentiometer tolerances to ±10%. The industry standard is ±20%. Tightening potentiometer tolerances will help you accurately shape your tone.
Pure Tone 1/4" Output Jack
We exclusively use Pure Tone output jacks in all builds. Why? Because they're unquestionably better than the old, industry standard. Period.
We've all heard the crackle of a weak connection caused by pressure grounds. This is due to the old style jack only having 1 squared-off point of contact trying to meet a rounded quarter inch plug. Pure Tone has completely changed that.
Pure Tone's multi-contact quarter inch output jack has 4 rounded contact points that hold the quarter inch plug firmly in place. With 4 times the contact points, all of the dreaded cracks, snaps, and pops are gone for good. Trust us, the second you plug into this jack, you'll never want to go back.
Sprague Orange Drop Capacitors
We've used Sprague Orange Drop Capacitors in our builds since day one. Orange Drop Polyester Film / Foil Capacitors are wound from the most reliable polyester film and aluminum foil available and are protected by a rugged conformal coating of orange epoxy.
All of that to say, these capacitors do a tremendous job of warming up your tone and taking away some of the bite of an overly bright sound. Like our potentiometers, these capacitors are held to a ±10% tolerance.
CRL 3-Way Switch
We built our T3W Control Plate with the best 3-Way Switch on the market - a CRL 3-Way Switch. It shouldn't come as a surprise that these are well known for being super durable, noise-free, and allowing a variety of mods.
Hand-Built In The U.S.A.
All 920D Custom creations are hand-built by experienced technicians at our shop in Greenbrier, Arkansas. We treat your new gear like it's going into one of our own guitars. Every millimeter of wire is cut precisely, every solder joint is perfectly smooth and symmetrical, and every bend is purposeful and direct. We hold everything to a tremendous level of quality because we know the smallest details matter and we take great pride in our work.
Telecaster® 3-Way Control Plate Upgrade
Our 3-Way Control Plate is far from stock. Pre-wired and drop-in ready, it's built to completely clean up your tone and let the full quality of your pickups shine through. Consider our Control Plate the ultimate upgrade to polish and improve your tone.
- 1 - Chrome Control Plate
- 2 - Chrome Knurled Flat Knobs
- 2 - 920D Custom 450G Series 250K Pots by CTS
- 1 - Genuine CRL USA 3-Way Switch with Black Switch Tip
- 1 - .022 Orange Drop Capacitor by Sprague Electric
- 1 - Pure Tone Output Jack
- 1 - 920D Custom Signature Wiring by Gavitt Wire
- Bridge / Neck