The Adam Audio A77X Powered Studio Monitor offers the same outstanding features, and advanced technologies as the A7X, but the A77X adds higher, compression-free sound pressure levels and dynamics. The Adam Audio A77X Powered Studio Monitor is is perfectly suited for both near- and midfield monitoring thanks to its powerful design and radiation characteristics.
Adam Audio A77X Powered Studio Monitor Features
- Responsive Dual 7 inch monitor design with 1.5 inch voice coils
- X-ART tweeter with Accelerating Ribbon Technology
- 38Hx to 50kHz Frequency Response
- 50 watt Class A/B tweeter Amplifier, 100 watts Thru each 7 inch Subwoofer
- Front mounted power switch and volume control
- Both balanced XLR and unbalanced RCA output connectors
Like all models of the AX series, the A77X features the ADAM proprietary X-ART tweeter. The ‘X’ stands for ‘eXtended frequency response’ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has higher efficiency and higher maximum sound pressure levels.
The two 7 inch woofers are identical with that of the A7X. With their large voice coils (1.5 inch) and powerful amplifiers, they are capable of both very high maximum sound pressure levels as well as very deep registers. The woofers do not cover the same frequency bands: while both of them are responsible for the (sub-) bass frequencies up to about 400Hz, only one of them reproduces the midrange. This prevents interferences between the two drivers.
Amplifiers / controls
Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the bass-/midwoofers are driven by a 100W PWM amp each. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.
The rear panel features several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies. To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.
A Revolutionary Formula: 2 x 7 = 77
In some set-ups it can be advisable to use a horizontally designed speaker rather than a vertical one. Until now, such monitors were only available within the SX top line.